Abstract:Served as electro-optic switch, frequency converter and the optical parametric chirped pulse amplifier (OPCPA), highly deuterated DKDP crystals are critical optical elements in high power laser systems. In our work, samples taken in Z direction and I-type phase-match direction from an as-grown high deuterium DKDP crystal, which was grown by the rapid growth method with continuous filtration. Thermo-gravimetric apparatus (TGA) measurement was applied to obtain the deuterium content of the DKDP crystal. the results showed the deuterium level of the samples in our experiments exceeded 98%. The ultraviolet–visible–near-infrared transmittance spectrum showed that the transmittance of Z-cut at 532 nm and I-type at 1064 nm were 92.99% and 96.07%, respectively. The 0% laser-induced damage threshold of Z-cut in 1064 nm was about 40J/cm 2 , exceeding much more than the application requirement in certain high power laser systems. The polarization state of laser had little effect on the laser-induced damage characteristics of I-type sample. Then the laser-induced damage morphologies of 98% DKDP crystals induced by the 1064 nm and 532 nm lasers were investigated. The results indicated that the "micro-explosion" of different kinds of defects in the bulk led to different damage morphologies, and many cracks in the damage pinpoints presented the regular orientation with better consistency in view of the I-type phase-match direction. Our research can provide a reference for the applications of highly deuterated DKDP crystals in high power laser systems.

Characteristics of broadband OPCPA based on DKDP crystals with different deuterations for the SEL-100 PW laser system

Experimental demonstration on 400 nm-scale bandwidth optical parametric chirped-pulse amplification based on mixed cascaded crystals

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

Bandwidth enhancement for parametric amplifiers operated in chirped multi-beam mode

Broadband Frequency Tripling Based on Segmented Partially Deuterated KDP Crystals

Degenerated Optical Parametric Chirped-Pulse Amplification with Cesium Lithium Borate.

Mid-infrared pulse generation via achromatic quasi-phase-matched OPCPA

Optical Parametric Amplification Pumped by A Phase-Aberrated Beam

Bandwidth Enhancement Methods of Telecom-Region Entangled Twin Photons Via Quasi-Phase-Matched Spontaneous Parametric Down-Conversion

Broadband Compensation of Dispersion in APL Using OPC Based on DFB Semiconductor Lasers

Optical and laser damage properties of 98% deuterium DKDP crystal in different crystal orientations

Non-collinear broadband phase-matching for dual-chirped optical parametric amplification

CEP-Stable, Few-Cycle, kHz OPCPAs for Attosecond Science: Energy Scaling and Coherent Sub-Cycle Pulse Synthesis

High-energy, Phase-Stable, Ultrabroadband Khz OPCPA at 21 Μm Pumped by a Picosecond Cryogenic Yb:YAG Laser

Ktp Optical Parametric Oscillator Pumped by the Laser with A Sbs Phase Conjugate Mirror

Optimization design of stable and high quality optical parametric chirped pulse amplification system

A versatile high-average-power ultrafast infrared driver tailored for high-harmonic generation and vibrational spectroscopy

Broadband, Efficient, and Robust Quasi-Parametric Chirped-Pulse Amplification.

Spatiotemporal dispersion compensation for a 200-THz noncollinear optical parametric amplifier

Temperature- And Wavelength-Insensitive Parametric Amplification Enabled By Noncollinear Achromatic Phase-Matching

Comparative Study on Coherent Noise in Optical Parametric and Quasi-Parametric Chirped-Pulse Amplification