Abstract:In this paper, we demonstrate a simplified one-to-many scheme for efficient mid-infrared (MIR) parametric conversion. Such a scheme is based on a continuous wave (CW) single longitudinal mode master oscillator power-amplifier (MOPA) fiber system as the signal source and a picosecond pulsed MOPA fiber system, exhibiting multiple longitudinal modes, as the pump source. The signal and pump beams are combined and co-coupled into a piece of 50-mm long 5% MgO-doped PPLN crystal for the parametric conversion. As high as ∼3.82 W average power at a central idler wavelength of ∼3.4 µm is achieved when the launched pump and signal powers are ∼41.73 and ∼11.45 W, respectively. Above some threshold value, the delivered idler power shows a roll-over effect against the signal power and saturation-like effect against the pump power. Consequently, the highest conversion efficiency is observed at such a threshold pump power. To the best of our knowledge, our result represents the highest average power produced from any single-pass parametric conversion source with >3 µm idler wavelength feeding with a CW signal. Moreover, our proposed scheme can simplify the design of parametric conversion system significantly and meanwhile make the system more robust in applications. This is attributed to two main aspects. Firstly, the scheme's one-to-many feature can reduce wavelength sensitivity remarkably in the realization of quasi-phase-matching. Secondly, for moderate power requirement it does not always require a high peak power synchronized pulsed signal source; a CW one can be an alternative, thereby making the system free from complex time synchronization and the related time jitter.

Broadband, Efficient, and Robust Quasi-Parametric Chirped-Pulse Amplification.

Photonic Approach for Generating Bandwidth-Doubled and Switchable Multi-Format Chirp Waveforms.

Ultrabroad bandwidth of quasi-parametric amplification beyond the phase-matching limit

Analysis and evaluation of idler absorption for quasi-parametric chirped-pulse amplification

Comparative Study on Coherent Noise in Optical Parametric and Quasi-Parametric Chirped-Pulse Amplification

Direct ultrafast parametric amplification pumped by a picosecond thin-disk laser

The Analysis and Optimization of Broadband Fiber Optical Parametric Amplifiers Pumped by Chirped Pulses

New Method of Chirped-Pulse Spectrum Shaping Using Phase Mismatched Optical Parametric Chirped Pulse Amplification

Bandwidth enhancement for parametric amplifiers operated in chirped multi-beam mode

Photonic Generation of Chirped Microwave Signals with High Time-Bandwidth Product

Experimental demonstration on 400 nm-scale bandwidth optical parametric chirped-pulse amplification based on mixed cascaded crystals

Bandwidth Enhancement Methods of Telecom-Region Entangled Twin Photons Via Quasi-Phase-Matched Spontaneous Parametric Down-Conversion

Optical Parametric Amplification Pumped by A Phase-Aberrated Beam

Picosecond-Pulse-Pumped Efficient Optical Parametric Amplifier for Non-Chirped Femtosecond Pulses

Chirped-Pulse Spectrum Shaping Using the Over-Saturating Course in Optical Parametric Chirped Pulse Amplification

Broadband CPW-based impedance-transformed Josephson parametric amplifier

Over 3.8 W, 3.4 µm picosecond mid-infrared parametric conversion based on a simplified one-to-many scheme

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

High efficiency broadband parametric amplification assisted by second harmonic generation

Mid-infrared pulse generation via achromatic quasi-phase-matched OPCPA

Microwave Photonics‐based Channelized Receiving and Reconstruction for Broadband RF Signal