Abstract:One-step printing of electrically conductive inks on textiles is one of the simplest and most prospective methods to manufacture functional wearable electronics. However, the high surface roughness and porous structure as well as poor temperature endurance of most textiles have become the major challenges for the realization of printed electronic textiles (E-textiles). To solve these issues, the UV curable conductive ink with fast curing and low temperature characteristics was formulated to fabricate the flexible fabric-based conductive patterns using screen printing method. The specific focus was spent on investigating the effect of ink composition on curing speed, film forming ability, morphological characteristics and electrical properties of conductive patterns directly printed on fabric substrates. Firstly, we determined the necessity of defoamer for the formation of uniform and continuous printed textile-based patterns, and optimized the film forming ability of UV-curing ink by exploring the defoamer performance. Then, the ink curing speed was found heavily depending on the different types and contents of photoinitiators. Finally, the nano-silver loading showed critical influence to the screen-printability and the electrical properties of printed patterns. An ink formulation with 60 wt% nano-silver, 4 wt% photoinitiator (1173), and 0.2 wt% defoamer (BYK-555) showed satisfactory screen printability, and the conductive patterns with 1.0 mm width exhibited a remarkably low resistivity of 4.04 × 10 −5 Ω cm. Moreover, the high performance of the conductive pattern screen-printed on four different fabrics by the formulated UV curable conductive ink further demonstrated its application potential. The results showed that uniformity and electrical properties of printed patterns were directly related to the weaving method, texture characteristic, and roughness of the textiles. We believe these results will provide basic guidance for the formulation design of conductive ink and facilitate the utility of textiles-based wearable electronics.

Fabricating different patterns of flexible inorganic semiconductor films via colloidal ink printing on textiles

Direct Fabrication of Stretchable Electronics on a Polymer Substrate with Process‐Integrated Programmable Rigidity

A Strategy for Fabricating Ultra-Flexible Thermoelectric Films Using Ag2Se-Based Ink

Recent Advances on Mechanics of Transfer Printing for Flexible and Stretchable Electronics

Transfer Printing Techniques for Flexible and Stretchable Inorganic Electronics

Semi-liquid Metal and Adhesion-Selection Enabled Rolling and Transfer (SMART) Printing: A General Method Towards Fast Fabrication of Flexible Electronics

Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper-based flexible electronics

Fabrication of paper-based conductive patterns for flexible electronics by direct-writing

Versatile fabrication of liquid metal nano-ink based flexible electronic devices

Fabrication of an Organic Field Effect Transistor Using Nano Imprinting of Ag Inks and Semiconducting Polymers

Using a Flexible Fountain Pen to Directly Write Organic Semiconductor Patterns with Crystallization Regulated by the Precursor Film

Printable Inorganic Nanomaterials for Flexible Transparent Electrodes: from Synthesis to Application

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink

Formulation of UV curable nano-silver conductive ink for direct screen-printing on common fabric substrates for wearable electronic applications

Photoreactive and Metal-Platable Copolymer Inks for High-Throughput, Room-Temperature Printing of Flexible Metal Electrodes for Thin-Film Electronics.

Direct Writing of Flexible Electronics Through Room Temperature Liquid Metal Ink.

Flexible Substrates Enabled Highly Integrated Patterns with Submicron Precision Toward Intrinsically Stretchable Circuits

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

Directly Printable Flexible Optoelectronics through Surface Atomic Modification of Liquid Metals at Room Temperature

Direct Writing on Paper Substrate to Prepare Silver Electrode Structures for Flexible Sensors.

One‐Step Liquid Metal Transfer Printing: Toward Fabrication of Flexible Electronics on Wide Range of Substrates