Abstract:A full-scale 120 m path length ITER toroidal interferometer and polarimeter (TIP) prototype, including an active feedback alignment system, has been constructed and undergone initial testing at General Atomics. In the TIP prototype, two-color interferometry is carried out at 10.59 μm and 5.22 μm using a CO2 and quantum cascade laser (QCL) respectively while a separate polarimetry measurement of the plasma induced Faraday effect is made at 10.59 μm. The polarimeter system uses co-linear right and left-hand circularly polarized beams upshifted by 40 and 44 MHz acousto-optic cells respectively, to generate the necessary beat signal for heterodyne phase detection, while interferometry measurements are carried out at both 40 MHz and 44 MHz for the CO2 laser and 40 MHz for the QCL. The high-resolution phase information is obtained using an all-digital FPGA based phase demodulation scheme and precision clock source. The TIP prototype is equipped with a piezo tip/tilt stage active feedback alignment system responsible for minimizing noise in the measurement and keeping the TIP diagnostic aligned indefinitely on its 120 m beam path including as the ITER vessel is brought from ambient to operating temperatures. The prototype beam path incorporates translation stages to simulate ITER motion through a bake cycle as well as other sources of motion or misalignment. Even in the presence of significant motion, the TIP prototype is able to meet ITER’s density measurement requirements over 1000 s shot durations with demonstrated phase resolution of 0.06° and 1.5° for the polarimeter and vibration compensated interferometer respectively. TIP vibration compensated interferometer measurements of a plasma have also been made in a pulsed radio frequency device and show a line-integrated density resolution of δ nL = 3.5 × 10 17 m−2.

T-15MD Tokamak Microwave Interferometer for Measuring the Average Electron Density of Plasma

Microwave Diagnostics System in the HL-2A Tokamak

Microwave Reflectometry for Plasma Density Profile Measurements on Hl-2a Tokamak

Design of microwave reflectometor on HL-2A tokamak

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Assessment of the Effect of Plasma Density Evolution of the T-15MD Tokamak on the Phase and Frequency Shift of the Signals of the Vertical Channel of the Microwave Interferometer

Measurement of Turbulence Propagation Velocity Using Doppler Reflectometer on HL-2A Tokamak

The microwave interferometer on J-TEXT tokamak

A new technique for tokamak edge density measurement based on microwave interferometer

Implementation and Data Processing of a Five-Channel Microwave Interferometer with High Temporal Resolution and Low Noise on Sino-UNIted Spherical Tokamak.

Design and Implementation of an Interferometer with High Stability and Wide Dynamic Range for Steady-State Plasmas

A transmission-line microwave interferometer for plasma electron density measurement

Optical Fiber Interferometer Application for High Electron Density Measurements on Compact Torus Plasmas.

Design and Implementation of A 150 Ghz Single-Channel Millimeter Wave Interferometer on Joint Text Tokamak

Conceptual Design of the Tangentially Viewing Combined Interferometer-Polarimeter for Iter Density Measurements

Combined Analysis of Laser Interferometer and Microwave Reflectometer for a Consistent Electron Density Profile on HL-2A

Correlation Polarimeter-Interferometer in the DIII-D Tokamak

Measurement of electron density profile by microwave reflectometry on tokamaks

Long-time Measurements of Line-Integrated Plasma Electron Density Using a Two-Color Homodyne Optical Fiber Interferometer

Tests of a Two-Color Interferometer and Polarimeter for ITER Density Measurements

Tests of a Full-Scale ITER Toroidal Interferometer and Polarimeter (TIP) Prototype on the DIII-D Tokamak (Invited).