Abstract:Solid solutions of ceramic pigments of red shade have been synthesized based on YAlO3 perovskite structure doped with chromium by means of conventional synthesis; that is, the “ceramic route”. To optimize this synthesis, an emphasis has been made on the study of stoichiometry, calcination conditions and mineralizer incorporation. Various studies have demonstrated the high stability of perovskite structures, which ensures stable coloration at high temperatures. This is a highly important factor in the ceramic sector, given the scarcity of red glazes functional at temperatures close to those required of porcelain stoneware and their environmental constraints. Such a limitation makes it impossible in the European community to manufacture using toxic materials such as Se and Cd (cadmium sulfoselenide) that offer interesting colors at low temperatures. Pigments have been synthesized within the Y1−xCrxAlO3, YCrxAl1−xO3 and Y1−xAl1−yCrx+yO3 chromium-doped systems in molar ratios between n = 0.01 molar and n = 0.10 molar. The pigments obtained have been characterized by X-ray diffraction to identify the crystalline phases responsible for the shade; that is, the formation of the perovskite crystalline structure YAlO3 responsible for the red shade, together with lateral phases of garnet Y3Al5O12 of lower intensity. Visible ultraviolet spectrophotometry shows absorption bands corresponding to Cr(III) in octahedral position and the appearance of Cr(IV) in both octahedral and tetrahedral positions. The morphology of the samples was studied using a scanning electron microscope, obtaining information from the secondary and back scattered electrons. The viability of its use in ceramic glazes was verified after applying them mixed at 4% by weight in a glaze to an industrial porous single-firing cycle, collecting the L*a*b* chromatic coordinates using a visible ultraviolet spectrophotometer based on the CIE L*a*b* system, giving rise to red colorations.

Solid-phase synthesis of perovskite using spent SCR catalyst and calcium carbonate and its application as ceramic opacifier

Synthesis of sphene by TiO<sub>2</sub> combined with CaCO<sub>3</sub> and SiO<sub>2</sub> in solid phase and its application as ceramic opacifier

Synthesis of Perovskite by Solid-Phase Method with Metatitanic Acid and Calcium Carbonate and Its Pigment Properties Investigation

Preparation of TiO2-SiO2-CaCO3 Composite Opacifier by Hydrophobic Agglomeration and Mechanism of Inhibiting Glaze Yellowing

A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2, CaCO3 and TiO2

Influence of Ca3(PO4)2 on the Surface Morphology and Properties of a CaO-Al2O3-SiO2-Fe2O3-Based High Temperature Phase Reconstructed Complex

Preparation of a CaCO3-TiO2 Composite Based Opaque Glaze: Insight into the Mechanism of Opacification and Glaze Yellowing Inhibition

Development of Red Ceramic Pigments with Perovskite Structure Prepared through a Traditional Route

Bifunctional Modified Biopolymer for Highly Efficient and Stable Perovskite Solar Cells and Modules

Development of Sapphirine Opaque Glazes for Ceramic Tiles

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Preparation and Application of Apatite–TiO2 Composite Opacifier: Preventing Titanium Glaze Yellowing through Pre-Combination

Rutile-perovskite multi-phase composite by mechano-chemical method together with calcination: Preparation and application in coatings and ceramic glaze

Preparation and characterization of perovskite ceramic powders by gelcasting

Preparation and Application of Apatite-TiO<sub>2</sub> Composite Opacifier: Preventing Titanium Glaze Yellowing through Pre-Combination

Formation mechanism of titania based opacified glaze with novel core-shell nanostructure

Optimization of hydrothermal autoclaving parameters for the synthesis of porous ceramics from porcelain tile polishing residue

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

PREPARATION AND CHARACTERIZATION OF TiO2/SERICITE COMPOSITE MATERIAL WITH FAVORABLE PIGMENTS PROPERTIES

EFFECTS OF SUBSTITUTION OF Sm2O3 BY Pr2O3 ON THE STRUCTURE & DIELECTRIC PROPERTIES OF CaO-Li2O-Sm2O3-TiO2 CERAMICS

Properties and evolutions of high-performance porcelain thin ceramic plates enhanced by multi-phase microstructure derived from sustainable smoky quartz tailings