Abstract:Due to the weak rigidity of flexible thin-walled part and tool, deformation inevitably occurs under the action of a cutting force in the flank milling of thin-walled parts, resulting in reductions of the machining accuracy and efficiency. To solve the above problem, a force-induced deformation prediction model based on the static substructure method and a flexible error compensation strategy for the deformation of the thin-walled part and tool in flank milling are proposed. The tool is considered to be a cantilevered beam to calculate its deformation. The thin-walled part is divided into two substructures, namely, the substructure with the material to be cut (STBC) and the unmachined substructure, which remains unchanged. Deformation models of the two substructures are constructed based on the element stiffness matrix of the thin-walled part. The time-varying stiffness and the removed material from the thin-walled part are only updated in the deformation model of the STBC. The deformation model of the entire thin-walled part is constructed by coupling the deformation models of the two substructures. In this way, the degrees of freedom of the deformation model of the entire thin-walled part are significantly reduced. To reduce the deformation error, a flexible error compensation strategy is proposed. The tool location at the initial feed position is directly compensated by the mirror principle. For the other tool locations, the tool location at the next feed position is adjusted with the compensated tool location at the previous feed position as the initial iteration value. This flexible error compensation strategy is based on the continuity of the compensated toolpath, which is close to the actual cutting process and adjusts the tool locations with high convergence. Finally, the proposed methods are proven via flank milling experiments. The deformation prediction results agree with the experimental results, and the deformation errors are reduced greatly after error compensation by using the proposed strategy.

Tool deflection investigation and deflection compensation of drill thread milling

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Tool deflection and geometrical error compensation by tool path modification

Study on Tool Deflection Compensation Method Based on Cutting Force Observer for Orbital Drilling of CFRP/Ti Stacks

Optimal Deformation Error Compensation Process in Flank Milling of Thin-Walled Workpieces

An Improved Fix-Length Compensation Method for Electrical Discharge Milling Using Tubular Tools

Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts

Cutting mechanics and efficiency of forward and reverse multidirectional turning

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

Mechanics and Dynamics of Multifunctional Tools

Effect of interference magnitude on ultimate strength and failure analysis of aluminium-drill-pipe-body-tool-joint-assemblies with Johnson-Cook model

Enhancing thread cutting performance with CNT-embedded micro textured tools

Precision Machining Of Thin-Walled Workpiece By Nc Compensating Deflection

Deep-hole Axis Deviation Mechanism of Weak Stiffness Small-Diameter Single-Lip Tool in Low-Frequency Vibration-Assisted Drilling

Prediction and Compensation of Countersinking Depth Error in Drilling of Thin-Walled Workpiece

Research on the edge design precision PCD thread milling tool