Abstract:The countersink depth accuracy is a remarkable quality index in modern aerospace industry, and it needs to be controlled quite accurately due to the extremely tight tolerances. However, the wide use of the thin-walled workpiece with low stiffness makes it difficult to achieve the required tolerance because of the complex deformation in the countersinking process. Focusing on the accurate control of countersink depth in the drilling of thin-walled workpiece, this paper provides a novel insight into the study on predicting of the feasible workpiece deformation and compensating for the countersink depth error through both theoretical and experimental analyses. An analytical model of workpiece deformation is first presented with the Fourier series approach in this study, and the finite element simulation is carried out to verify the model precision. Then a flexible cutting force model is developed to help to analyze the effect of deformation on the thrust force in the countersinking process. A novel approach of integrated iterative algorithm, that considers both the deformation and the cutting force, is established to calculate the final feasible deformation and make decision for the countersink depth error compensation, and the generalized convergence and adaptability of this iterative algorithm are investigated based on the calculus theory. Finally, the proposed integrated methodology is verified by multivariate simulations and experiments, and the results show that the countersink depth accuracy could be effectively guaranteed by countersinking with compensation based on this integrated methodology. The work in this paper enables us to understand the causes of poor countersink depth accuracy in the drilling of thin-walled workpiece and develop new countersinking techniques to satisfy the tight tolerance.

Prediction and Compensation of Countersinking Depth Error in Drilling of Thin-Walled Workpiece

Countersink depth control of robot drilling based on pressure foot displacement compensation

Optimization Design for Countersink Depth Error Prediction and Compensation of CFRP/Al Stacks

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

An Approach to Countersink Depth Control in the Drilling of Thin-Wall Stacked Structures with Low Stiffness

Investigation on the Countersink Errors in the Drilling of Thin-Wall Stacked Structures

Quantitative Analysis and Improvement of Countersink Depth in Stack Drilling

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Countersink accuracy control of thin-wall CFRP/Al stack drilling based on micro peck strategy

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

State-space theory–based closed-loop control of machining error of thin-walled part modeling and application

Adaptive Optimization Method for Prediction and Compensation of Thin-Walled Parts Machining Deformation Based on On-Machine Measurement

Error Compensation for Machining of Large Thin-Walled Part with Sculptured Surface Based on On-Machine Measurement

Improved Forecasting Compensatory Control to Guarantee the Remaining Wall Thickness for Pocket Milling of a Large Thin-Walled Part

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

The micro-drilling process fine modeling with the strain characteristics of undeformed chip considered

Precision Machining Of Thin-Walled Workpiece By Nc Compensating Deflection

Rapid Prediction and Compensation Method of Cutting Force-Induced Error for Thin-Walled Workpiece

Deformation prediction and error compensation in multilayer milling processes for thin-walled parts

An accelerated convergence approach for real-time deformation compensation in large thin-walled parts machining