Abstract:The high toxicity of hydrogen sulfide combined with poor sensitivity at room operating temperature urge for the development of new sensitive materials for sensors complying with this requirement, as well as a fast response and low cost. In this work, we have successfully developed materials for surface acoustic wave (SAW) sensors sensitive to H2S gas that provide a reversible response at room temperature. The sensitive materials were created by plasma-enhanced chemical vapor deposition of a-CH films using methane as a precursor with argon and argon admixed with hydrogen or nitrogen and applied on piezoelectric quartz substrates. Smooth films, with an AFM root mean square below 1.5 nm, were obtained in all cases, although slight topographical variations were noted, depending on the gas types. XPS detected varying degrees of oxidation, indicating that the assisting gases played a crucial role in introducing oxygen-containing functional groups, thus influencing the material’s surface chemistry and sensitivity response. A hydrogen plasma treatment was applied on the a-CH deposited sensors as a further sensor preparation step. The hydrogen plasma treatment resulted in significant modifications in the topographical features, including roughness increase and notable variations in the surface aspect ratios, as confirmed through AFM data analysis, which involved advanced pixel height analysis and line profile processing. X-ray photoelectron spectroscopy (XPS) studies indicated the formation of new functional groups, increased defect density, and a significant reduction in electron transitions following hydrogen plasma treatment. The sensors demonstrated a reversible response to H2S gas within 8 to 20 ppm concentration ranges, effectively detecting these levels. The sensitivity of the sensors was significantly enhanced, up to 39% through hydrogen plasma treatment, reaching an improved overall performance in detecting low concentrations of H2S down to 0.9 ppm. These findings highlight a-CH thin films as an excellent candidate for next-generation SAW sensors. The study also suggests the potential for experimenting with various assisting gases during plasma deposition and additional plasma treatments to push detection capabilities to below ppm levels.

Improved response and recovery times of flexible screen-printed working electrode performance for hydrogen gas detection by copper oxide chitosan

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

Cellulose-Copper Oxide hybrid nanocomposites membranes for H2S gas detection at low temperatures

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

Metal-polymer hybrid chemiresistive sensor for low concentration fast hydrogen detection

Substantially Accelerated Response and Recovery in Pd‐Decorated WO3 Nanorods Gasochromic Hydrogen Sensor

Electrospun copper oxide nanofibers for H2S dosimetry

Flexible Electrochemical Sensor for Hydrogen Peroxide Detection by Employing WO3/g-C3N4 Nanostructures

Synergistic Effect of PdO and Parallel Nanowires Assembled CuO Microspheres Enables High Performance Room-Temperature H2S Sensor

Nano‐Patterned CuO Nanowire Nanogap Hydrogen Gas Sensor with Voids

Hydrogen peroxide biosensor based on chitosan/2D layered double hydroxide composite for the determination of H2O2

Identification of H2S Impurity in Hydrogen Using Temperature Modulated Metal Oxide Resistive Sensors with a Novel Signal Processing Technique

Trace Hydrogen Sulfide Sensing Inspired by Polyoxometalate-Mediated Aerobic Oxidation

Optimization by Hydrogen Plasma Treatment of a-CH and Hydrogen/Nitrogen-Assisted a-CH Layers for SAW Sensors

Gasochromic WO 3 /MoO 3 sensors prepared by co-sputtering for hydrogen leak detection with long-lasting visible signal

Echinus-like Cu–Mo2C/C yolk-shell composites for ultrasensitive detection of hydrogen peroxide

Quaternary conducting Cs/GO/PANi hydrogel composites: A smart material for room temperature hydrogen sensing

Porous-Pt-CuO-driven electrochemical biosensor for tracking of endogenous H2S biomessenger molecules

Hydrogen detecting characteristics of a palladium nanoparticle/indium gallium oxide based sensor