Abstract:Abstract The steel industry is one of the main contributors to global greenhouse gas emissions, responsible for about 7 to 9% of the world’s total output. The steel sector is under pressure to move toward net-zero emissions by reducing its consumption of coke as the main method of reducing iron-rich feed materials to iron. Due to its well-developed synthesis process, high supply chain, straightforward handling technologies, and highly developed long-standing infrastructure, ammonia has the potential to become a replacement for coke as a future iron ore reductant. This work reviews previous research on ammonia direct reduction of iron oxides and the possible formation of iron nitrides. A thermodynamic assessment using FactSage 8.2 thermochemical software was carried out examining the behavior of ammonia gas as the reductant upon heating, detailed evaluations of the stable phases present under different reaction conditions and using different feed materials, and the formation and stability of iron nitride phases. The results suggest that the reduction of hematite with ammonia occurs in two steps below 570 °C and three steps above 570 °C. The ratio of Fe 2 O 3 /NH 3 was predicted to affect the reduction reactions by promoting a greater reduction degree and simultaneously lowering the initial temperature needed for reduction, while the excess gas concentration can suppress FeO formation. A predominance area diagram was developed showing the main areas of stable phases as a function of the partial pressure of NH 3 and temperature. The formation of iron nitrides during the process was predicted and these were not expected to cause issues for the formation of iron due to their instability under the conditions studied. This analysis can be used to inform further experimental studies regarding ammonia reduction of iron oxide. Graphical Abstract

Preparation of ferrochromium nitride via reduction and nitridation of chromite spinel with ammonia gas

Discussing mechanisms of nitrogen removal during ferritic stainless steelmaking

Experimental Study on Preparation of Ferrochrome by SHS

Behavior of chromium in the reduction and smelting of high alumina nickel laterite in blast furnace

Thermodynamic Studies of the Fe-Cr-C-N System by Emf Measurements

Isothermal reduction and nitridation kinetics of ilmenite concentrate in ammonia gas

Study of Chromium Activity in the Cr-Fe-N System by Galvanic Cell Method

Surface nanocrystallization of pure iron achieved by anodization-reduction treatment and its effect on lower-temperature nitriding behaviors

Thermal Kinetics and Nitriding Effect of Ammonia-Based Direct Reduction of Iron Oxides

A novel high activity MnXFe3−XO4 spinel catalyst for selective catalytic reduction of NO using NH3 prepared by a short process from natural minerals for low-temperature sintering flue gas: Effect of X value on catalytic mechanism

Structural Effects of Iron Spinel Oxides Doped with Mn, Co, Ni and Zn on Selective Catalytic Reduction of NO with NH3

Lattice-Stabilized Chromium Atoms on Ceria for N2O Synthesis

Thermodynamic Study of Production of Vanadium–Nitrogen Alloy and Carbon Monoxide by Reduction and Nitriding of Vanadium Oxide

Magnetic Properties and Thermal Stability of Nanocrystalline Ε-Fe3n Prepared by Gas Reduction-Nitriding Method

The decomposition of Fe-substituted rhodochrosite during coaling enhanced the transformation of NO before catalyst bed: Effect of instant-calcination

The role of overlayered nitride electro-materials for N2 reduction to ammonia

Iron Oxide Direct Reduction and Iron Nitride Formation Using Ammonia: Review and Thermodynamic Analysis

Alkaline steaming-assisted conversion: a new strategy for the synthesis of pure NiFe2O4 and CoFe2O4 spinel ferrite nanoparticles

Heteroatoms doped iron oxide-based catalyst prepared from zinc slag for efficient selective catalytic reduction of NOx with NH3

Theoretical insight into electrochemical nitrate reduction on transition metal iron doped graphdiyne

Simplifying the Creation of Iron Compound Inserted, Nitrogen-Doped Carbon Nanotubes and Its Catalytic Application