Abstract:A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Electron Microscope (SEM) indicates relatively higher nitrogen concentrations (up to 12 at.%) within the diffusion layer while microscopic nitrides are not formed and existing carbides are not dissolved. Moreover, in the diffusion layer, nitrogen is found to be dispersed in the matrix and forming nanosized precipitates. The small coherent precipitates are observed by High-Resolution Transmission Electron Microscopy (HR-TEM) while the presence of nitrogen is confirmed by electron energy loss spectroscopy (EELS). Hardness tests show that the material hardness increases linearly with the nitrogen concentration, reaching up to 14.5 GPa in the surface while the Young Modulus remains essentially unaffected. Indeed, the original steel microstructure is well preserved even in the nitrogen diffusion layer. Nitrogen profiles show a case depth of about ~43 microns after nine hours of nitriding process. These results indicate that pulsed plasma nitriding is highly efficient even at such low temperatures and that at this process temperature it is possible to form thick and hard nitrided layers with satisfactory mechanical properties. This process can be particularly interesting to enhance the surface hardness of tool steels without exposing the workpiece to high temperatures and altering its bulk microstructure.

Surface nanocrystallization of pure iron achieved by anodization-reduction treatment and its effect on lower-temperature nitriding behaviors

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Mechanical Properties of Iron Plating Layer after Nitriding

Thermal Kinetics and Nitriding Effect of Ammonia-Based Direct Reduction of Iron Oxides

Preparation of ferrochromium nitride via reduction and nitridation of chromite spinel with ammonia gas

Diffusion Nitride Surface Layers on Aluminum Substrates Produced by Hybrid Method Using Gas Nitriding

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Promotional effect of iron oxide on the catalytic properties of Fe–MnOx/TiO2 (anatase) catalysts for the SCR reaction at low temperatures

Kinetics of Iron Nitride Layer Growth during the Nitriding of AISI 1085 Non-Alloy Steel and AISI 52100 Alloy Steel

Even Incorporation of Nitrogen into Fe0 Nanoparticles as Crystalline Fe4N for Efficient and Selective Trichloroethylene Degradation

Reduction of Nitrobenzene Using Nanoscale Zero-Valent Iron Supported on Mesoporous Silica and Ferric Species Variation

Effect of Surface Structure of &Lt;em>&alpha;</em>-Fe<sub>2</sub>o<sub>3</sub> on the Selective Catalytic Reduction of NO by NH<sub>3</sub>

Effect of iron loading on the performance and structure of Fe/ZSM-5 catalyst for the selective catalytic reduction of NO with NH3

Microstructure and Corrosion Resistance of Nitrogen-Rich Surface Layers on AISI 304 Stainless Steel by Rapid Nitriding in a Hollow Cathode Discharge

Critical Thickness of Α″-Fe16n2 Layer Prepared in Low-Temperature Nitriding

Surface Functionalization of Zif-8 with Ammonium Ferric Citrate Toward High Exposure of Fe-N Active Sites for Efficient Oxygen and Carbon Dioxide Electroreduction

Preparation of superhydrophobic nanoplate iron oxide surface on a carbon steel for anti-wetting applications

Kinetics of Nitrate Reductive Denitrification by Nanoscale Zero-Valent Iron

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

Surface Physical and Chemical Modification of Pure Iron by Using Atmospheric Pressure Plasma Treatment

Enhanced selective nitrate-to-nitrogen reduction by aerosol-assisted iron–carbon composites: Insights into the key factors