Abstract:Suspension effect poses a big threat to the integrity and safety of corroded pipelines. In this work, a finite element (FE) based multi-physics field coupling model was developed to determine the mechano-electrochemical (M-E) interaction at an external corrosion defect on a suspended X100 steel pipe and predict its failure pressure. Theoretical calculations were used for model validation. Parameter effects including the defect location on the pipe, geometry of the defect, suspension length and pipe burial depth were determined. Results demonstared that, generally, the M-E effect at corrosion defect caused an increased stress concentration and anodic current density (i.e., corrosion rate), decreasing the failure pressure of the pipeline. The effect became more apparent when the pipe was in suspension. Both the stress and the anodic current density at the corrosion defect were dependent on the defect geometry, especially the defect depth. When the depth was up to 40% of pipe wall thickness, the von Mises stress exceeded the yield stress of the steel, causing local plastic deformation. A critical defect length of <math>20Dt</math> (D is the outer diameter of the pipe and t is pipe wall thickness) existed, below which the von Mises stress and the anodic current density at the corrosion defect increased with increased defect length. When the defect length exceeded the critical value, the effect was not obvious. An increased suspension length of the pipe would elevate the local stress and anodic current density at the corrosion defect, reducing the failure pressure of the pipe. A critical pipe burial depth of 2.5 m was identified, exceeding which the failure pressure of the pipe decreased rapidly with the increased burial depth. When the burial depth was smaller than 2.5 m, the effect was marginal. The location of the corrosion defect on the pipe did not affect the local stress, anodic current density and failure pressure at an appreciable level, and could be ignored in defect assessment on suspended pipelines.

Remaining lifetime assessment of gas pipelines subjected to stray current interference using an integrated electric-electrochemical method

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Multi-physics coupled simulation and experimental investigation of alternating stray current corrosion of buried gas pipeline adjacent to rail transit system

Assessment of interference scope induced by stray current in the metro depot for the corrosion risk of buried metal pipeline

Research on corrosion rate assessment of buried pipelines under dynamic metro stray current

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Unraveling mechanisms and failures of stray current corrosion in urban Subway adjacent pipeline networks through statistical insights and 3D simulation

A risk assessment framework considering uncertainty for corrosion-induced natural gas pipeline accidents

Numerical Simulation of Stray Current Corrosion of Buried Steel Pipeline under Cathodic Protection

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Modeling of mechano-electrochemical interaction at a corrosion defect on a suspended gas pipeline and the failure pressure prediction

Methods for the residual life assessment of corroded gas pipelines

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Assessment by finite element modelling of the mechano-electrochemical interaction at corrosion defect on elbows of oil/gas pipelines

CORROSION BEHAVIOR OF X70 PIPELINE STEEL AND CORROSION RATE PREDICTION UNDER THE COMBINATION OF CORROSIVE MEDIUM AND APPLIED PRESSURE

Subset simulation-based reliability analysis of the corroding natural gas pipeline

Novel method for prediction of corrosion current density of gas pipeline steel under stray current interference based on hybrid LWQPSO-NN model

An integrated risk analysis model for corroded pipelines subjected to internal pressures: Considering the interacting effects

Dynamic Safety Assessment of Oil and Gas Pipeline Containing Internal Corrosion Defect Using Probability Theory and Possibility Theory

Corrosion And Its Effects On Remaining Strength And Lifetime Of Underground Oil Pipeline

Modeling and Analysis of Transmission Line Structures Corrosion due to DC Current from Pipeline’s Cathodic Protection