Abstract:The lithium ion batteries are dominating rechargeable battery market with advantages of long cycle life, adaptability, and high energy density; however, disadvantages including lithium resource shortage, high processing cost arising from the other battery components (Co-based cathode and electrolyte), and safety concerns due to flammable organic electrolytes and highly reactive lithium species hinder further development to grid-scale batteries. The zinc ion batteries have been proposed as an alternative for lithium ion batteries owing to suitable electrochemical properties for grid-scale batteries of large specific capacity (820 mAh/g), high volumetric capacity (5854 mAh/cm3), and low redox potential (-0.76 V). Also, zinc's low cost, environmental abundance, inexpensive mass production, and superior safety due to usage of aqueous electrolyte make zinc ion battery extremely promising for future battery applications. Prior to the commercialization of zinc ion batteries, a detrimental issue remains with rapid degradation of battery performance mainly due to dendrite formation and additional side reactions during charging and discharging processes. The dendrite growth in association with the reduction of zinc ions during the discharging process causes lifespan shortening related to short circuit arising from separator piercing as well as a decrease of capacity via unceasing of water/electrolyte decomposition accompanied with fast electrolyte depletion. Also, parasitic side reactions between electrode and electrolyte produce hydrogen and zinc sulfate hydroxide while wasting both electrolyte and zinc electrode. These reactions involves electron consumption which severely reduce a Coulombic efficiency and prohibit us from reaching theoretically expected electrochemical performances. Several strategies have been proposed to suppress the dendrite growth and side reactions, such as interfacial electrode modification through an increase of the surface area of zinc anodes, insertion of electrolyte additive, manipulation of crystallographic orientation of electrode. Here, we propose an additional ferroelectric layer coating onto the zinc electrode for the compression of dendrite growth and the hindrance of the side reaction. Among the ferroelectric materials, we select composites consisting of poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) and barium titanate nanoparticles to take both advantages of P(VDF-TrFE) — cost-effective fabrication, compatibility with battery components, and non-toxicity and of barium titanate — lead-free inorganic ferroelectric materials with high ferroelectricity. The 800 nm-thick P(VDF-TrFE)/barium titanate nanocomposite ferroelectric layer is spin-coated onto a bare zinc electrode and works as an anode for battery operation. A coated ferroelectric layer serves as a physical barrier to block zinc corrosion and hydrogen reaction. Meanwhile, dendrite suppression achieved by ferroelectric layer resulting from the uniform electric field and additional ionic path can be attributed to longer cycle life. Therefore, we could observe about three times extended cycle life and a decrease of side reaction products (hydrogen, zinc sulfate hydroxide) to the half value or less than bare zinc electrode.

3D Printing‐Induced Phase Transition in Ferroelectric Porous Polymer Coatings for Stable Zinc Anodes

3D Printing of MXene‐Enhanced Ferroelectric Polymer for Ultrastable Zinc Anodes

MICROFLUIDIC‐assisted 3d Printing Zinc Powder Anode with 2d Conductive MOF/MXene Heterostructures for High‐stable Zinc‐organic Battery

Phase Inversion‐Induced Porous Polymer Coating for High Rate and Stable Zinc Anode

Synergistic Effect of 3D Elastomer/Super‐Ionic Conductor Hybrid Fiber Networks Enables Zinc Anode Protection for Aqueous Zinc‐Ion Batteries

A Self-Repairing Polymer-Inorganic Composite Coating to Enable High-Performance Zn Anodes for Zinc-Ion Batteries

One-Pot preparation of microporous-polymer protected 3D porous Zn anode to enable advanced aqueous zinc batteries

Ultra‐Stable 3D‐Printed Zn Powder‐Based Anode Coated with a Conformal Ion‐Conductive Layer

Enabling Stable Zn Anode with PVDF/CNTs Nanocomposites Protective Layer Toward High‐Performance Aqueous Zinc‐Ion Batteries

3D zincophilic micro-scaffold enables stable Zn deposition

3D Porous Copper Skeleton Supported Zinc Anode toward High Capacity and Long Cycle Life Zinc Ion Batteries

3D network of zinc powder woven into fibre filaments for dendrite-free zinc battery anodes

Dynamically Favorable Ion Channels Enabled by a Hybrid Ionic‐Electronic Conducting Film toward Highly Reversible Zinc Metal Anodes

Achieving Stable Zinc Metal Anodes by Regulating Ion Transfer and Desolvation Behavior.

Enhancing Zinc Electrode Stability Through Pre‐Desolvation and Accelerated Charge Transfer via a Polyimide Interface for Zinc‐Ion Batteries

3D Cold‐Trap Environment Printing for Long‐Cycle Aqueous Zn‐Ion Batteries

<i>In Situ</i> Etching of Multifunctional Three-Dimensional Interfacial Layers for the Construction of Porous Zn Anodes with Enhanced Surface Textures

A Biomimetic Polymer-Based Composite Coating Inhibits Zinc Dendrite Growth for High-Performance Zinc-Ion Batteries

Fabrication of Predominant β-Phase Poly(vinylidene fluoride) Protective Film for Zinc Anodes via Ion–Dipole Interaction for High-Stability Aqueous Zinc-Ion Batteries

Ferroelectric Polymer-Based Composite Layer Coated Zinc Ion Batteries Toward Dendrite-Free Zinc Anodes

Conjugated Organic Polymer As Multifunctional Protective Layer Enable Stable Zinc Anodes