Abstract:Modeling the unsteady flow in an intermediate turbine duct in an aero-engine is highly challenging partly owing to the complex physics subjected to unsteady vortical flow upstream. In this paper, the high-fidelity detached eddy simulations of an aggressive intermediate turbine duct are performed and validated against published data. The dominating coherent flow motions are then captured with sparsity-promoting dynamics mode decomposition under different tip gap sizes and rotating speeds of the rotor blade. Furthermore, a novel low-order spectrum reconstruction method based on selected flow modes and Gaussian fitting is proposed for fast prediction of the instantaneous flowfield in the intermediate turbine duct. The sources of error are discussed and a potential approach to improve the prediction accuracy is proposed. It reveals that the proposed method achieves accurate and generalized performance in reconstructing and predicting flow fields with periodic features for a small cost of calculation time. The maximum root mean squared error in the scenario of tip gap size and rotating speed variation is below 5.96 and 8.41, respectively. The error analysis shows that the variation of flow modes under different inflow conditions and nonlinearity of interacting flow structure accounts for the major part of prediction error. By applying a Proper orthogonal decomposition (POD) interpolation on the flow modes, the maximum root mean squared error in the scenario of tip gap size and rotating speed variation can drop to 4.76 and 2.69 without breaking the physical meaning of the representative modes. The novelty of the present work lies at the proposed prediction method combining DMDSP and POD-interpolation, of which the majority of the physical information are maintained and the prediction accuracy is improved. It may provide a promising approach for turbomachinery design, flow prediction, and investigating underlying mechanisms with low data requirements.

Modeling of the unsteady aerodynamic force of turbine blades considering nonuniform vane pitch

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Generation and distribution of turbulence-induced forces on a propeller

Modeling unsteady loads on wind-turbine blade sections from periodic structural oscillations and impinging gusts

Unsteady Responses and Correlation Characteristics of Propeller Blades under Turbulence Excitation

Research on the Power Capture and Wake Characteristics of a Wind Turbine Based on a Modified Actuator Line Model

Aerodynamic Analysis And Optimization Of Wind Turbines Based On Full Free Vortex Wake Model

An improved dynamic model for wind-turbine wake flow

Efficient Forced Response Minimization Using a Full-Viscosity Discrete Adjoint Harmonic Balance Method

Prediction of 3D Aerodynamics Performance of Wind Turbines Using Potential Based Panel Method

Unsteady rotor force suppression of a pump-jet by stator actuated oscillating trailing edge flaps: A numerical study

Improved Prediction of Coherent Structure in An Intermediate Turbine Duct

Development and assessment of an actuator volume method in rotating frame for predicting the flow-field of horizontal-axis wind turbines

A new class of actuator surface models for wind turbines

Numerical Predictions of Pressure Fluctuations in a Model Pump Turbine with Small Guide Vane Opening based on Partial Averaged Navier Stokes Approach

Aerodynamic Behavior of a Wind Turbine Under Blade Pitching Motion

A Modified Reynolds-Averaged Navier–Stokes-Based Wind Turbine Wake Model Considering Correction Modules

Aerodynamic load control on a dynamically pitching wind turbine airfoil using leading-edge protuberance method

Stochastic dynamical wake modeling for wind farms

Method for the prediction of unsteady aerodynamic load of wind turbine rotor

Design and modeling simulation of a vibration excitation system for turbine blades