Abstract:Journal of Vibration and Control, Ahead of Print. Wind turbine design and operation will benefit from a better understanding of blade dynamics. Usually, only one surface or one side of a 3D structure is measured in Scanning Laser Doppler Vibrometer (SLDV) tests due to test setup and instrumentation limitations. However, in this work, we demonstrate an approach to overcome these limitations while also using an SLDV that provides high spatial resolution measurement. In the case of a wind turbine blade, only one surface is typically measured; however, it is beneficial to investigate both blade global modes and the relative motions of the two blade surfaces by using both numerical models and experimental tests. This work creatively develops both experimental and numerical approaches to investigate the dynamics and the relative motions of both surfaces of the wind turbine blade from global and local perspectives. On the experimental side, experimental modal testing is conducted on both surfaces of the wind turbine blade with a high spatial resolution 3D SLDV. The two surfaces of the wind turbine blade are measured and stitched together to build the blade experimental mode shapes of both surfaces. A total of over 1500 points are scanned from both surfaces of the blade in a non-contact fashion to obtain not only the global bending modes (flap-wise and edge-wise), the global torsional modes, but also the localized panel mode shapes. On the numerical side, a finite element model of the blade is developed to obtain the numerical mode shapes. The experimental mode shapes on either one surface or both surfaces of the blade are used to validate the blade finite element model. The mode shape correspondence between the model and the test is also identified. With the availability of both experimental and numerical mode shapes, localized panel modes of the wind turbine blade are observed and characterized, and as a result the numerical model is validated. This work provides useful case studies for the design and structural analysis of wind turbine blades based on both the experimental observations and the validation of numerical models typical of those used for blade design and blade structural analysis.

Design and modeling simulation of a vibration excitation system for turbine blades

Study on Discrete Modeling Method of Modal Testing for Turbine Blade

Vibration characteristics on a wind turbine rotor using modal and harmonic analysis of FEM

Electromagnetically Excited Vibration Analysis for an Asynchronous Electrical Machine with Finite Element Method

CALCULATING FOR AERODYNAMIC STABILITY RESPONSE OF WIND TURBINE BLADE IN FLAPWISE AND EDGEWISE DIRECTION

Nonparametric Modeling and Vibration Analysis of Uncertain Jeffcott Rotor with Disc Offset

The influence of wind characteristic on aeroelastic stability for wind turbine blades

Study Of Snubbing Mechanism Using Finite Element Method

Exploration on flutter mechanism of a damaged transonic rotor blade using high-fidelity fluid–solid coupling method

Vibration investigation of rotor system with unbalance and blade-casing rubbing coupling faults

Model and experimental analysis of a rotor rig dynamics with time-varying characteristics

Modeling of the unsteady aerodynamic force of turbine blades considering nonuniform vane pitch

Model verification and vibration analysis of the four-disk hollow flexible shaft rotor system

Structural design optimization of a high-speed rotor system for mechanical vibration mitigation

Vibration characteristics analysis of a type of turbine disk-blade assembly system in the civil aero-engine

Aerodynamic Design and Modal Analysis on Wind Turbine Blade Based on CAD/CAE

Research on Flutter Characterization of Flexible Blade Response under Typhoon Operating Conditions

Modelling of aero-mechanical response of wind turbine blade with damages by computational fluid dynamics, finite element analysis and Bayesian network

Influence Of The Aerodynamic Vibration Excitation On The Turbine Blade Vibration In A Vehicle Turbocharger

Experimental and numerical investigation of the structural dynamic characteristics for both surfaces of a wind turbine blade

Design and Simulation on the High Frequency Hydraulic Flutter Generator