Abstract:Alloy solidification is an important process to control the mechanical properties of engineering products. During solidification, dendrite fragmentation occurs commonly as a key phenomenon to determine the microstructure and to obtain fine grain size. Recently, in situ synchrotron X-radiography technique was developed and applied to observe thermodynamic behaviors such as dendrite growth and fragmentation during solidification. External forces such as mechanical and electromagnetic stirring, and thermal shock were added into the solidification process to investigate their effects on the fragmentation behavior. However, most work conducted in literature focused on qualitative aspects e.g. morphology transition or solute distribution and quantitative investigation such as determining the specific relationship between fragmentation and solidification conditions was rather limited. In this work, the third generation synchrotron X-radiography technique was used to observe the solidification process of an Al-15%Cu (mass fraction) alloy. Experimental conditions including the strength of the pulsed electromagnetic fields, dendrite growth direction and the temperature gradients were varied and the subsequent effect on fragmentation was studied and quantified. A computer program was developed based on Matlab to perform the image processing and measurement. The fragmentation number according to experiments was counted and correlated to the mushy zone depth and local solid fraction. Results showed that a stronger electromagnetic field, growing against gravity and growing at higher velocity would significantly increase the fragmentation number. Furthermore, the fragmentation number followed a Gauss distribution as a function of either mushy zone depth or local solid fraction, and the maximum fragmentation occurred when the-solid fraction was about 0.45. In the end the extent to which caused those statistic results above were analyzed as the necking process due to the velocity field, the cumulative solid due to the gravity field and the liquid flow due to the electromagnetic field.

Formation of Fractal Dendrites by Laser induced melting of Aluminum Alloys

The Mechanism of Dendrite Formation in a Solid-State Transformation of High Aluminum Fe-Al Alloys

Phase-field simulation of the dendrite growth in aluminum alloy AA5754 during alternating current electromagnetic stirring laser beam welding

Microstructure and Growth Model of TiC Dendritic Crystals Produced by Laser Surface Alloying Technique

Phase field simulation of dendrite evolution during powder-based laser metal deposition

The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions

Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification

Carbon Dendrite Formation Induced by Pulsed Laser Irradiation

Three-dimensional morphology of an ultrafine Al-Si eutectic produced via laser rapid solidification

Semi-Quantitative Study of Amorphous Structures in Laser Cladding of Zl111 Aluminum Alloy

A 3D Analysis of Dendritic Solidification and Mosaicity in Ni-Based Single Crystal Superalloys

Fractal Analysis of Fracture Surfaces in Aluminum Borate Whisker-Reinforced Aluminum Alloy 6061 Composite

Growth and Microstructure of Aln Whiskers and Dendrites

Discontinuously Branching Tree Morphology Induced at the NaCl/AgCo Interface by Ion Irradiation

Formation mechanism of aluminum and its carbides under wobbling laser melting injection with carbon nanotubes-SiC hybrid particles

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

The columnar dendrite and equiaxed dendrite transformation of high Nb-TiAl alloy by laser-directed energy deposition

Revealing the Diversity of Dendritic Morphology Evolution During Solidification of Magnesium Alloys Using Synchrotron X-ray Imaging: A Review

QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS

Fractal growth of amorphous silicon crystallization induced by aluminum

Branchy Alumina Nanotubes