Abstract:Novel metal-intermetallic Ni/Ni3Al multilayer films are synthesized by a magnetron sputtering technique. The fractography, elastic modulus, and the oxidation resistance of the multilayer films are studied by a series of experimental tests. The scanning electron microscopy fractography of the films shows that both Ni and Ni3Al layers fracture with the appearance of ductile metal failure. No metal-intermetallic delamination appears in the multilayered films. Fluted dimpling in each Ni and Ni3Al layer is evident and continuous, layer through layer, illustrating very good adherence among the constituent layers. Such adherence makes the toughness of the Ni layers capable of transferring into the Ni3Al layers. Young's modulus of the Ni/Ni3Al film is found to be 226 and 253 +/- 10 GPa by nanoindentation and laser acoustic techniques, respectively. The continuity of elastic modulus between the two phases is revealed by nanoindentation test. The modulus continuity indicates an excellent integration of the constituent layers with similar crystal structure and close lattice constants. This integration makes the multilayers unsurpassed in comprehensive mechanical properties. Sheet resistance measurements show a good protective ability of the Ni/Ni3Al multilayers during high temperature oxidation. X-ray photoelectron spectroscopy spectra suggest that crystallized Al2O3/Ni scales formed during the deposition and subsequent annealing processes are apparently responsible for the stability of these films under oxidative conditions. The appearance of the crystallized Al2O3/Ni thin scales on the top of Ni3Al layers provides the Ni/Ni3Al multilayers good thermal oxidation resistance without lowering the fracture toughness.

Ion-mixing-induced Fractal Growth in Thin Alloy Films

FRACTAL GROWTH OF NICKEL-BASED ALLOYS IN THIN FILMS

Observations of Fractal Patterns Induced in Thin Solid Films by Ion Irradiation.

Disclination Loops Observed in Ion Irradiated NiMo Amorphous Films and Their Fractal Characteristics

Fractal Aggregation of Magnetic Particles in Ag-Co Thin-Film Surfaces

Ion Beam Method to Study Fractal Aggregation of Magnetic Particles on Thin Solid Films:

In Situ Formation of Dual Amorphous Phases with Nanoscale Fractal Morphology by Ion Beam Mixing in the Ternary Y–Nb–Co System

Disclination Loops in Ni-Mo Amorphous Alloy Films Induced by Ion Irradiation

Manipulation of Ordered Layered Structures by Interface-Assisted Ion-Beam Mixing in Immiscible Ag-Co and Ag-Ni Systems

Growth of Fractal Patterns During Irradiation-Induced Amorphization in Nano-Sized Ni–W Multilayers

Fractal Growth of Nanocrystals in Association with Amorphous Spinodal Decomposition Observed in an Immiscible Hf-Nb System

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Some New Structural Transformations Induced By Ion-Beams

Aggregation Process in the Ion-Irradiated Solid Films

Effect of chemical and magnetic interactions on fractal growth under deposition–diffusion–aggregation in some binary metal systems

Fractography, Elastic Modulus, and Oxidation Resistance of Novel Metal-Intermetallic Ni/Ni3al Multilayer Films

Discontinuously Branching Tree Morphology Induced at the NaCl/AgCo Interface by Ion Irradiation

Phase Evolution Upon Ion Mixing and Solid-State Reaction and Thermodynamic Interpretation in the Ni-Nb System

Growth of Two-Dimensional Patterns in the Fe–Cu Multilayers Driven Far from Equilibrium by Ion Irradiation

Fluence-dependent Microstructure and Nanomechanical Property in Co-Ni-V Medium Entropy Alloy Thin Films

Formation of Metastable Carbide and Fractal Structure in Co Thin Films by Carbon Ion Implantation