Abstract:Alloy solidification is an important process to control the mechanical properties of engineering products. During solidification, dendrite fragmentation occurs commonly as a key phenomenon to determine the microstructure and to obtain fine grain size. Recently, in situ synchrotron X-radiography technique was developed and applied to observe thermodynamic behaviors such as dendrite growth and fragmentation during solidification. External forces such as mechanical and electromagnetic stirring, and thermal shock were added into the solidification process to investigate their effects on the fragmentation behavior. However, most work conducted in literature focused on qualitative aspects e.g. morphology transition or solute distribution and quantitative investigation such as determining the specific relationship between fragmentation and solidification conditions was rather limited. In this work, the third generation synchrotron X-radiography technique was used to observe the solidification process of an Al-15%Cu (mass fraction) alloy. Experimental conditions including the strength of the pulsed electromagnetic fields, dendrite growth direction and the temperature gradients were varied and the subsequent effect on fragmentation was studied and quantified. A computer program was developed based on Matlab to perform the image processing and measurement. The fragmentation number according to experiments was counted and correlated to the mushy zone depth and local solid fraction. Results showed that a stronger electromagnetic field, growing against gravity and growing at higher velocity would significantly increase the fragmentation number. Furthermore, the fragmentation number followed a Gauss distribution as a function of either mushy zone depth or local solid fraction, and the maximum fragmentation occurred when the-solid fraction was about 0.45. In the end the extent to which caused those statistic results above were analyzed as the necking process due to the velocity field, the cumulative solid due to the gravity field and the liquid flow due to the electromagnetic field.

The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions

QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS

A Synchrotron X-Ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

The Effect of Local Thermo-Solutal Convection on Dendrite Fragments at Variable Cross Section

Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound

Determining the Critical Fracture Stress of Al Dendrites Near the Melting Point Via Synchrotron X-ray Imaging

Non-axially Oriented Dendritic Microstructures and Their Mechanical Characteristics of Single-Crystal Al-4.5%Cu Alloy

In Situ Study on Columnar-Equiaxed Transition and Anaxial Columnar Dendrite Growth of Al-15%Cu Alloy by Synchrotron Radiography

Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys

Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach

Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification

Simulation of Dendritic Deformation Induced by Convection in Alloy Solidification

Direct Numerical Simulation of Solid Deformation During Dendritic Solidification

Simulation of dendritic remelting and fragmentation using coupled cellular automaton and Eulerian multiphase model

Real time imaging on dendrite morphology evolution during alloy solidification under electric field

Coupling in Situ Synchrotron X-ray Radiography and Phase-Field Simulation to Study the Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys

Investigation on the Formation Mechanism of Irregular Dendrite During Directional Solidification of Al–Cu Alloys under a High Magnetic Field

Influence of Lower Frequency Electromagnetic Field on Dendritic Crystal Growth in Special Alloys

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model