Abstract:Alloy solidification is an important process to control the mechanical properties of engineering products. During solidification, dendrite fragmentation occurs commonly as a key phenomenon to determine the microstructure and to obtain fine grain size. Recently, in situ synchrotron X-radiography technique was developed and applied to observe thermodynamic behaviors such as dendrite growth and fragmentation during solidification. External forces such as mechanical and electromagnetic stirring, and thermal shock were added into the solidification process to investigate their effects on the fragmentation behavior. However, most work conducted in literature focused on qualitative aspects e.g. morphology transition or solute distribution and quantitative investigation such as determining the specific relationship between fragmentation and solidification conditions was rather limited. In this work, the third generation synchrotron X-radiography technique was used to observe the solidification process of an Al-15%Cu (mass fraction) alloy. Experimental conditions including the strength of the pulsed electromagnetic fields, dendrite growth direction and the temperature gradients were varied and the subsequent effect on fragmentation was studied and quantified. A computer program was developed based on Matlab to perform the image processing and measurement. The fragmentation number according to experiments was counted and correlated to the mushy zone depth and local solid fraction. Results showed that a stronger electromagnetic field, growing against gravity and growing at higher velocity would significantly increase the fragmentation number. Furthermore, the fragmentation number followed a Gauss distribution as a function of either mushy zone depth or local solid fraction, and the maximum fragmentation occurred when the-solid fraction was about 0.45. In the end the extent to which caused those statistic results above were analyzed as the necking process due to the velocity field, the cumulative solid due to the gravity field and the liquid flow due to the electromagnetic field.

A Synchrotron X-Ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu

The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions

QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS

Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound

Dendrite morphology in Al-20 wt%Cu hypoeutectic alloys in 24 T high magnetic field quantified by ex-situ X-ray tomography

In Situ Synchrotron X-ray Imaging on Morphological Evolution of Dendrites in Sn–Bi Hypoeutectic Alloy under Electric Currents

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Fast Synchrotron X-Ray Tomographic Quantification of Dendrite Evolution During the Solidification of Mg-Sn Alloys

3D Phase Field Modeling of Multi-Dendrites Evolution in Solidification and Validation by Synchrotron X-ray Tomography

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Effects of Electromagnetic Pulse Treatment on Spinodal Decomposed Microstructure, Mechanical and Corrosion Properties of AlCoCrFeNi High Entropy Alloy

The Effect of Natural Convection on Equiaxed Dendritic Growth: Quantitative Phase-Field Simulation and Comparison with Synchrotron X-Ray Radiography Monitoring Data

Uncovering electromigration effect on densification during electrical field assisted sintering

Effect of electromagnetic stirring current on the mechanical properties of Cu-15Ni-8Sn alloy and its mechanism of inducing dendrite refinement and Sn distribution homogenization

The effect of cross-section geometry of castings on dendrite evolution in Mg Gd alloys by in situ X-ray radiography

Synchrotron Tomographic Quantification of the Influence of Zn Concentration on Dendritic Growth in Mg-Zn Alloys

Dendritic Growth in Mg-Based Alloys: Phase-Field Simulations and Experimental Verification by X-ray Synchrotron Tomography

Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field

Reverse evolution in nanoscale Cu-rich precipitates of an aged Fe–Cu alloy under electropulsing

Effect of pulsed electromagnetic field treatment on dislocation evolution and subsequent artificial aging behavior of 2195 Al-Li alloy

Microstructure evolution, diffusion behavior, and mechanical properties of a Cu/AlCoCrFeNi 2.1 composite under pulsed magnetic field