Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Off‐axis compression behavior and failure mechanisms of needled carbon/quartz fiber reinforced phenolic resin composite based on acoustic emission

Progressive damage and tensile failure of open‐hole carbon fiber polymer composites reinforced by carbon nanotubes

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

In-plane shear damages consideration of hoop wound composite cylinders using acoustic emission method

Off-axial Angle Sensitivity of 3D Orthogonal Woven Composite Failure Behavior Subjected to In-Plane Compressive Loading

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Torsional Damage Analysis for Pre-Delaminated Carbon/glass Fiber-Reinforced Hybrid Laminates Based on Acoustic Emission

A Study on the Failure Mechanisms of Carbon Fiber/epoxy Composite Laminates Using Acoustic Emission

Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation

Damage mechanism identification and failure behavior of 2D needle-punched SiC f /SiC composites based on acoustic emission and digital image correlation

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Quantitative assessment of damage evolution of carbon fiber‐reinforced polymer laminates embedded with different nanoparticles using acoustic emission

In Situ Damage Propagation and Fracture in Notched Cross-Ply SiC/SiC Composites: Experiment and Numerical Modeling

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Experimental Investigation of Compressive Damage Mechanisms on 3-D Braided Composites by Acoustic Emission

Micromechanical modeling of longitudinal compression behavior and failure mechanism of unidirectional carbon fiber reinforced aluminum composites involving initial fiber misalignment