Abstract:Aims: This study aims to propose an 8-bit differential input low-power Successi,e Approximation Register (SAR) ADC with digital error correction technique for sensing bio-potential signals in wearable and implantable devices. Background: As dynamic comparators have the advantages of full swing output, low power consumption, high speed, and high impedance at the input, they are preferably used in energy-efficient SAR ADC’s. However, since the dynamic comparator is the most frequently used block in SAR ADC, research is ongoing to reduce its μW power further. Also, as the offset voltage of the comparator affects the linearity of ADC, it must be minimized. Linearity can further be improved by calibrating the output of ADC, and extensive surveys on the calibration methods prove that the addition- only digital error correction method is efficient in terms of power. Objective: The objective of this study is to design a low-power and low-offset dynamic comparator intended for SAR ADC to achieve highly linear digital output. In addition to this, the objective is to implement a power-efficient digital error correction technique for the output of SAR ADC to overcome the non-idealities due to process variations. Method: As power consumption is proportional to the number of transistors, the proposed comparator is a design obtaining the same output as the existing dynamic comparators with reduced transistor count. The proposed comparator, along with low power full swing three-input XOR logic gate, is implemented in SAR ADC with digital error correction technique in cadence 45 nm technology files, and its performance parameters are simulated. Results: The layout of the proposed dynamic comparator occupies an area of 3 μm 2 . The simulation results of this comparator with a load of 1 pF show that it has a total offset of 11.2 mV, a delay of 0.9 ns, and power consumption of 24 nW. It also achieves a gain of 49.5, i.e., 33.86 dB. The 8-bit ADC, along with the digital error correction technique operating at 143-kS/s and under 0.6 V supply voltage simulated in 45nm technology, consumes only 0.12 μW of power. The DNL and INL errors obtained are +0.22/-0.2 LSB and -0.28 LSB, respectively. SNR limited by noise is 48.25 dB, SFDR is 48.64 dB, and ENOB achieved is 7.72. Conclusion: To satisfy the requirement of the wearable and implantable devices, a low-power SAR ADC with good linearity is designed using a low-power and low-offset dynamic comparator. A digital error correction technique using a low-power XOR logic gate is implemented at the SAR ADC output to minimize the non-idealities due to the process variations.

Performance Optimization of SAR ADC using Dynamic Controlled Comparator at 45 nm Technology for Biomedical and IoT Applications

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A Threshold Control Technique for CMOS Comparator Design

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Low Power SAR ADC with Digital Error Correction Technique for Wearable and Implantable ECG Devices

Multi-Stage Comparator Progressive Offset Cancellation F or SAR ADC

A Three-Stage Dynamic Comparator for SAR ADC Optimized for Reduced Kickback Noise and Ultra-Low Delay

LOW-POWER DYNAMIC COMPARATOR WITH HIGH PRECISION FOR SAR ADC

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

Design of a 0.2V 2.08nW 10-bit 1kS/s High Energy Efficiency SAR ADC with Dummy Capacitor Splitting Technique for Biomedical Applications

Design of a Strong-Arm Dynamic-Latch based comparator with high speed, low power and low offset for SAR-ADC

Design of an Ultra-Low Power SAR ADC for Biomedical Applications

A 0.9V 12-Bit 200-Ks/s 1.07µw SAR ADC with Ladder-Based Reconfigurable Time-Domain Comparator

A 0.3V 10b 3MS/s SAR ADC With Comparator Calibration and Kickback Noise Reduction for Biomedical Applications

A Comparator-Reused Dynamic-Amplifier for Noise-Shaping SAR ADC

A 1.5fJ/conv-step 10b 100kS/s SAR ADC with gain-boosted dynamic comparator

A 6-Bit 700-Ms/s Single-channel SAR ADC with Low Kickback Noise Comparator in 40-Nm CMOS

A low power and high speed 45 nm CMOS dynamic comparator with low offset

Design and Analysis of Low Power and High-Speed Dynamic Comparator with Transconductance Enhanced in Latching Stage for ADC Application

Power Efficiency Comparison of Event-Driven and Fixed-Rate Signal Conversion and Compression for Biomedical Applications

VCO-Based Comparator: A Fully Adaptive Noise Scaling Comparator for High-Precision and Low-Power SAR ADCs