Self-Powered Solar-Blind UV Detectors Based on O-Terminated Vertical Diamond Schottky Diode with Low Dark Current, High Detectivity, and High Signal-to-Noise Ratio

Benjian Liu,Kang Liu,Sen Zhang,Victor Grigorievich Ralchenko,Xiaohui Zhang,Jingjing Xue,Dongyue Wen,Pengfei Qiao,Jiwen Zhao,Bing Dai,Lei Yang,Jiecai Han,Jiaqi Zhu
DOI: https://doi.org/10.1021/acsaelm.2c01164
IF: 4.494
2022-12-02
ACS Applied Electronic Materials
Abstract:Self-powered solar-blind UV detectors were fabricated using high-quality Ru/diamond Schottky diodes. Photocurrents of 1 nA and 1.3 nA were obtained for detector Semi and Mesh under the condition of zero bias and 220 nm UV light irradiation, while the dark currents of these two detectors were 0.53 pA and 0.007 pA at 0 V, respectively. Photosensitive areas of detector Semi and Mesh were 1 mm2 and 0.74 mm2, respectively. Rectification ratios as high as 1.5 × 107 and 5.7 × 108 at ±5 V for Semi and Mesh were obtained, showing good rectifying characteristics for the vertical Schottky diodes. Responsivities at 0 V of Semi and Mesh were 10.3 mA/W and 16.2 mA/W, respectively. High detectivities of 3.8 × 1012 Jones and 5.2 × 1013 Jones for detector Semi and Mesh indicate excellent self-powered detection performance. To make a comprehensive comparison of the performance of diamond solar-blind UV detectors, a log­(I ph) versus log­(I dark) graph was proposed, and the detector in this work showed an ultrahigh SNR of 2 × 105. A high linear dynamic range of 105.9 dB was achieved for the self-powered detector Mesh.
materials science, multidisciplinary,engineering, electrical & electronic
What problem does this paper attempt to address?