Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Structural effects and catalytic performance of Pd catalysts with micro-mesoporous structure on coal tar hydrodesulfurization

Effect of γ-Al2O3 Pore Structure on Activity of Supported Pd Catalysts in C9 Petroleum Resin Hydrogenation

Crucial Size Effect on Dicarbonylation of Acetylene over Pd/CsHPMo Heterogeneous Catalysts

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Advancement of Hydro-Desulfurization Catalyst and Discussion of Its Application in Coal Tar

Structural Effects of Microcrystalline Cellulose-Derived Carbon Supports on Catalytic Performance of the Pd(OH)2/C Catalysts for the Hydrogenolytic Debenzylation of Hexanitrohexaazaisowurtzitane Derivatives

Effect of Hierarchically Macro-Mesoporous Structure of NiMoS/Al2O3 Catalysts on Hydrodesulfurization Activity

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Supported Nanometric Pd Hierarchical Catalysts for Efficient Toluene Removal: Catalyst Characterization and Activity Elucidation

Effect of Support Pore Structure on Hydrodesulfurization Performance of Catalyst

Hierarchically Macro-Mesoporous Ni-Mo/Al2O3 Catalysts for Hydrodesulfurization of Dibenzothiophene

Lean methane combustion over zeolite-supported Pd catalysts: Structure-performance relationship and deactivation mechanism

Extraordinarily High Activity in the Hydrodesulfurization of 4,6-Dimethyldibenzothiophene over Pd Supported on Mesoporous Zeolite Y.

Pt-confinement catalyst with dendritic hierarchical pores on excellent sulfur-resistance for hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

Hierarchically porous ZSM-5/SBA-15 composite: Tuning pore structure and acidity for hydrodesulfurization of dibenzothiophene

Three-dimensional porous carbon materials as catalysts for upgrading coal pyrolysis volatiles to boost light tar

Highly Active Pd-based Catalysts with Hierarchical Pore Structure for Toluene Oxidation: Catalyst Property and Reaction Determining Factor

Study on Sulfur Conversion Characteristics in Catalytic Cracking of Coal Tar in the Presence of Dolomite-Supported Catalysts

MOF-derived CoP/C catalyst for efficient dibenzothiophene hydrodesulfurization

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Synergistic effect between CoS x and MoS 2 at the micrometer scale: Considerable promotion of the hydrodesulfurization of DBT