Abstract:This paper, a multi-material topology optimization method (MMTO) is presented for two-dimensional structures using modified ordered solid isotropic material with penalization (SIMP) under multiple constraints such as mass, stiffness, frequency, and stress. The element density is obtained by a density filtering and the Heaviside approximation , which are combined to avoid gray elements and numerical issues of stress. Effective improvement of multiphase material topology optimization was performed including the criteria for stiffness, stress, and free vibration. P -norm stress aggregation is employed to calculate the maximum von Mises stress and sensitivity of von Mises stress is formulated by the adjoint method. The natural frequency and stress constraints are solved simultaneously to enhance the stability and reduce the stress concentration of the optimized structures, which are not much covered in the literature. The multi-mode phenomenon in the eigenfrequency problem is treated by the simply proposed technique. Results indicate that the multi-material designs with multi-constraints can be illustrated and optimized effectively. The optimized topologies, for stress minimization, indicate that the maximum stress can be significantly reduced compared with compliance minimization. The maximum von Mises stress of the topological results considering the maximum stiffness with natural frequency and mass constraints is higher than that maximum stiffness with only mass constraints, which indicates that the optimized structure created considering the eigenvalues is safer. The proposed approach can obtain a reasonable result that effectively controls the stress level and reduces the stress concentration at the high stress regions of multi-phase material structures with multi-constraints. Benchmark numerical examples are presented to confirm the effectiveness of the presented method.

Isogeometric proportional topology optimization (IGA-PTO) for multi-material problems

Discrete Multi-Material Topology Optimization under Total Mass Constraint

Collaborative Robust Topology Optimization of FGMs Considering Hybrid Bounded Uncertainties Based on the Distance to Ideal Solution

Proportional Topology Optimization algorithm with virtual elements for multi-material problems considering mass and cost constraints

Multi-material proportional topology optimization based on the modified interpolation scheme

A Novel Derivative Free Methodology for Multi-Material Topology Optimization Based on Projective Transformations and Boolean Operations

An improved proportional topology optimization method combining a polarized material interpolation scheme and Heaviside threshold function

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

3D multi-material and multi-joint topology optimization with tooling accessibility constraints

Isogeometric Topology Optimization (ITO) of Fiber Reinforced Composite Structures Considering Stress Constraint and Load Uncertainties

Multi-material isogeometric topology optimization in multiple NURBS patches

A Multi-Objective Topology Optimization Methodology Based on Pareto Optimal Min-Cut

A NURBS-based Multi-Material Interpolation (N-MMI) for isogeometric topology optimization of structures

Improved proportional topology optimization algorithm for minimum volume problem with stress constraints

Multi-material topology optimization with multiple volume constraints: a general approach applied to ground structures with material nonlinearity

A proportional topology optimization method with level-set description and evolutionary strategy

An elastic properties-based topology optimization algorithm for linear orthotropic, functionally graded materials

Improved proportional topology optimization algorithm for solving minimum compliance problem

Isogeometric topology optimization of structures using the overweight approach

Topology optimization of variable thickness Reissner-Mindlin plate using multiple in-plate bi-directional functionally graded materials

Design of the multiphase material structures with mass, stiffness, stress, and dynamic criteria via a modified ordered SIMP topology optimization