Isogeometric topology optimization of structures using the overweight approach

Villalba, D.

DOI: https://doi.org/10.1007/s00158-024-03782-2

IF: 4.279

2024-05-12

Structural and Multidisciplinary Optimization

Abstract:In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included.

mechanics,computer science, interdisciplinary applications,engineering, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to use the Overweight Approach to achieve an efficient definition of material distribution in structural topology optimization when considering minimum weight and local stress constraints. Specifically, the paper proposes a two - dimensional isogeometric material distribution formula, aiming to provide solutions with high spatial resolution through fewer design variables. Meanwhile, in order to handle a large number of local stress constraints, the paper adopts the overweight constraint method. In addition, isogeometric analysis (IGA) is used for structural analysis, and the material distribution is modeled by quadratic B - splines. The optimization process is carried out by the sequential linear programming algorithm (SLP), which is driven by the first - order sensitivity analysis information of the isogeometric analysis formula. The core problem of the paper is the "Minimum Weight with Stress Constraints Problem", that is, to find the most economical structure (aiming at the lowest material cost) to support a set of loads under the requirement that the structural stress does not exceed the maximum allowable value. This problem is of great significance in engineering applications. The paper effectively solves this problem by introducing the overweight method to handle local stress constraints and using quadratic B - splines to define material distribution.

Isogeometric topology optimization of structures using the overweight approach

Isogeometric Analysis-Based Design of Post-Tensioned Concrete Beam Towards Construction-Oriented Topology Optimization

OPS-ITO: Development of Isogeometric Analysis and Topology Optimization in OpenSEES for Free-Form Structural Design

IGA-based topology optimization in the design of stress-constrained compliant mechanisms

Isogeometric Topology Optimization (ITO) of Fiber Reinforced Composite Structures Considering Stress Constraint and Load Uncertainties

A local solution approach for level-set based structural topology optimization in isogeometric analysis

Stress-related Topology Optimization with Multilevel Smoothed Isogeometric Densities and Bézier Elements

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

Guide-weight Method on Solving Topology Optimization Problems under Single Load Case

Topology optimization of three-dimensional structures subject to self-weight loading

Stress-based evolutionary topology optimization via XIGA with explicit geometric boundaries

The Path-Engulfment Method for Topology Optimization of Structures

Isogeometric topology and shape optimization for composite structures using level-sets and adaptive Gauss quadrature

An elastic properties-based topology optimization algorithm for linear orthotropic, functionally graded materials

Topology optimization of stiff structures under self-weight for given volume using a smooth Heaviside function

On the Indispensability of Isogeometric Analysis in Topology Optimization for Smooth or Binary Designs

Isogeometric topology optimization of strain gradient materials

Computational design of auxetic microstructures via stress-based topology optimization

Stress-based bi-directional evolutionary topology optimization for structures with multiple materials

Alternating optimization of design and stress for stress-constrained topology optimization

Evolutionary topology optimization for continuum structures using isogeometric analysis