Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to reduce the direct injuries caused by falling from height, we propose a new type of suspended elastic safety net system suitable for pylon assembly construction. Analyze the correlation between damping and toughness of the protection system, establish the falling object motion control method, and construct the mechanism model of the protection system accordingly. Full-scale impact tests are carried out using test pylons on transmission line projects. Test data is collected using high-speed cameras and dynamic data acquisition equipment to analyze the key impact dynamic response characteristics of the test model. The experimental results show that the system has three working stages. In the first stage, the elastic safety net is transformed from an initial equilibrium state, where it is subjected only to its gravity, to a taut state. In the second stage, as the elongation of the system continues to increase in the direction of impact, the internal forces transmitted by the net to the elastic rod and the supporting rope gradually increase until the energy dissipating devices connected to the elastic rod are activated. In the third stage, additional elongation of the system is provided by activating the support springs in the bearing supports. Based on the failure modes observed in the tests, the key factors leading to the breakdown of the system are investigated. A new numerical simulation method is developed which is not only capable of predicting the load-bearing capacity of an elastic safety net system under the impact of a falling object, but also accurately simulates the main operating characteristics, such as buckling of the elastic rods, activation of the energy-absorbing devices, and deformation of the net ropes. The numerical simulation model was evaluated using the experimental results, and the numerical response of the system was in good agreement with the experimental data.

Impact failure mechanism of kernmantle ropes for fall protection from heights

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

A novel fiber‐reinforced polymer rope: Simulation and theoretical investigation

Research on impact resistance of new suspended elastic safety net system

Numerical investigation of rope-core elasticity effects on rope–sheave traction

Study on bending fatigue failure behaviors of end-fixed wire ropes

A novel mechanical design of broken rope protection device for enhancing the safety performances of overhead manned equipment in coal mine

A Three Dimensional Approach to Model Steel Wire Ropes Used in High Energy Absorber Apparatus

Experimental-based statistical models for the tensile characterization of synthetic fiber ropes: a machine learning approach

Bending fatigue damage behavior of wire rope in hoisting system of drilling rig

Development and Experiment Research on Multi-function Wire Rope for Manned Rescue Lifting Equipment

Tribo-failure characteristics of the multilayer winding hoisting wire ropes with two different structures under vibration

A novel fiber-reinforced polymer rope: Concept design and experimental evaluation

Friction, wear and residual strength properties of steel wire rope with different corrosion types

Experimental measurement for dynamic tension fatigue characteristics of HMPE fibre ropes

Tribological properties and residual strength of wire rope with different strands during the interlayer-transition stage

Cyclic testing of continuously wetted synthetic fiber ropes

Research on The Influence of Rope Jumping on The Tension of Multi-layer Winding Wire Ropes in Super Deep Mine Hoisting Machine

Experimental investigation of spooling test on the multilayer oceanographic winch with high-performance synthetic fibre rope

Effects of fatigue load characteristics on bending tribo-corrosion-fatigue damage of steel wire ropes in seawater and pure water

Fatigue and impact load: Experimental investigation on mechanical behavior of high modulus polyethylene yarns