Abstract:Steel wire ropes will creep under long-term loading, resulting in the deterioration of tensile structure performance. From the perspective of materials science, the creep of steel ropes can be understood as the degradation of their equivalent elastic modulus over time, and there are currently no methods or formulas to quantify this degradation. The main purpose of this paper is to propose a general formula for calculating the equivalent modulus degradation of wire ropes, which will facilitate the assessment of performance variations in tensile structures during service. In this study, an experiment on the degradation of the equivalent elastic modulus of steel wire ropes under long-term loading was conducted. In the experiment, measurements were taken using two types of small-diameter steel wire ropes at three stress levels, with data collected over 20,000 h. The results showed that the degradation of the equivalent elastic modulus transitions from rapid to gradual over time and can be divided into three periods. A universal calculation formula was proposed to conveniently express this degradation law, derived from viscoelastic theory with specific parameters obtained through data fitting. To extend the formula's applicability to a wider range of diameters and stress levels, ANSYS was utilized to develop refined models of steel wire ropes and the parameters were determined by the experimental results. After comparison, it was observed that the differences between the calculated values of the formula and the simulated values of the model were relatively small for small diameters, verifying the accuracy of the proposed formula. However, for larger diameters, significant differences were observed in the early phase of the second period. Consequently, an additional experiment was conducted on a wire rope with a diameter of 18 mm to verify the feasibility of the formula for large diameters. The results showed that the measured values closely matched the simulated values from the model. Based on the simulated values, a revised formula was proposed for largediameter ropes. The two proposed calculation formulas can be used to quickly estimate the degradation of the equivalent elastic modulus of steel wire ropes. Numerical results further demonstrated that due to the degradation of the equivalent elastic modulus of wire ropes, the mechanical performance of the structure significantly deteriorates over time, offering a valuable reference for structural health monitoring and tensile structure evaluation.

Numerical investigation of rope-core elasticity effects on rope–sheave traction

Finite Element Analysis of Steel Wire Ropes Considering Creep and Analysis of Influencing Factors of Creep

Mechanical analysis and experimental research of elevator traction rope

The Degradation of Equivalent Elastic Modulus of Steel Wire Ropes under Long-Term Loading

A Three Dimensional Approach to Model Steel Wire Ropes Used in High Energy Absorber Apparatus

Mechanical analysis of a type of wire rope subjected to tension

A New Fully-Detailed Finite Element Model of Spiral Strand Wire Ropes for Fatigue Life Estimate of a Mooring Line

Numerical study of rope materials of the mooring system for gravity cages

Calibration and Analysis of Mechanical Modeling for Traction Wire Rope of Mountainous Orchard Carrier

Tribological properties and residual strength of wire rope with different strands during the interlayer-transition stage

Bending fatigue damage behavior of wire rope in hoisting system of drilling rig

A novel fiber‐reinforced polymer rope: Simulation and theoretical investigation

Comparison between mechanical behaviors of wire ropes with distinct contact modes based on the finite element method

The Influence to Mine Hoisting SteelWire Rope Tension and Deformation from Velocity and Acceleration

Parametric modeling and finite element analysis of triangular strand wire rope

Friction and wear of multiple steel wires in a wire rope

Experimental investigation of spooling test on the multilayer oceanographic winch with high-performance synthetic fibre rope

Lifting capacity model based on wheel-rope friction for portable rope-track hoist

Experimental Evaluation of Dimension-Stable Synthetic Fibre Rope under Investigation of Spooling Test on the Multilayer Winch Drum

Study on bending fatigue failure behaviors of end-fixed wire ropes

Calculation of the depth of rope-tightening soft material and analysis of its relationship with the tightening force