Abstract:Fracture toughness of CFRP laminates with different central interfaces was calculated by considering the curved crack front shape. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. The extensive use of multidirectional composite laminates requires to understand the delamination behavior at interfaces between plies with different fiber orientations. In this study, double cantilever beam testing was performed to investigate the mode I interlaminar fracture of carbon fiber reinforced polymer laminates with different central interfaces (0//0, 0//+45 and +45//−45). X‐ray microtomography revealed the curved crack front shape that was incorporated to calculate fracture toughness. The fracture toughness varies with the crack length in a typical delamination resistance curve, which can be quantified by an empirical equation. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate, compared to constant toughness. It was found that the delamination mechanism is independent of central interfaces. However, compared to unidirectional laminates, multidirectional laminates are less resistant to crack initiation, but more resistant to propagation with higher toughness and shorter fiber bridging zone. Highlights Mode I interlaminar fracture of CFRP laminates with different central interfaces was investigated experimentally and numerically. Curved crack front shape was incorporated to calculate fracture toughness. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. Multidirectional laminates are less resistant to crack initiation but more resistant to propagation with higher toughness and shorter fiber bridging zone.

Prediction of a complex delamination front using a general cohesive model

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Modeling delamination growth in laminated composites

A Coupled Cohesive and XFEM for 3-D Delamination Onset and Growth Prediction

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

An enriched cohesive law using plane-part of interfacial strains to model intra/inter laminar coupling in laminated composites

Structural cohesive element for the modelling of delamination in composite laminates without the cohesive zone limit

Application of a delamination model to laminated composite structures

The evolution of a transverse intra-ply crack coupled to delamination cracks

Effect of friction and shear strength enhancement on delamination prediction

A New Mechanism Based Cohesive Zone Model for Mode I Delamination Coupled with Fiber Bridging of Composite Laminates

Prediction of laminate delamination with no iteration

Finite Element Analysis of the Influence of Cohesive Law Parameters on the Multiple Delamination Behaviors of Composites under Compression

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques

XFEM Simulation of Delamination in Composite Laminates

A highly efficient prediction of delamination migration in laminated composites using the extended cohesive damage model

Modelling of Mode I Delamination using a Stress Intensity Factor Enhanced Cohesive Zone Model

Delamination Buckling and Crack Propagation Simulations in Fiber-Metal Laminates Using xFEM and Cohesive Elements

XFEM Simulation of Delamination in Composite Laminates Part A Applied Science and Manufacturing

Prediction of Delamination Growth in Laminated Structures Loaded by Quasi-static and Cyclic Loads