Abstract:Polyaspartic acid (PASP) was an environment-friendly and biodegradable polymer, with a protein-like structure composed of L-aspartic acid residues. In this work, PASP with different molecular weights (2000, 4000–5000 and 6000–8000) was utilized as the retarder for α-hemihydrate gypsum (α-HH), and the effect of PASP on the coagulation, hydration and crystallization process of gypsum were investigated. Results showed that the addition of PASP with a low dosage of 0.01% efficiently delayed the hydration of α-HH and prolonged the setting process. Among three polyaspartic acids, PASP with molecular weight of 4000–5000 (PASP 4–5) exhibited the best performance not only in postponing the setting time to 95 min, but also in decreasing the negative impact of retarder on the strength of gypsum. Significantly, the slightest loss of 2.65% in compressive strength was obtained here when compared with other retarders previously reported, under the lowest dosage of 0.01% PASP 4–5. Consequently, the effect of PASP chain length on the retardation of α-HH was analyzed in detail. The conductivity, heat of hydration, X-ray diffraction (XRD), EDTA titration method and scanning electron microscopy (SEM) characterization found that PASP prevented the dissolution of α-HH. Total organic carbon analyzer (TOC) and X-ray photoelectron spectroscopy (XPS) measurements showed that the carboxyl groups of PASP adsorbed on the surface of α-HH to hinder the dissolution of α-HH. The molecular dynamic simulation of PASP further exhibited that three kinds of PASPs presented different conformations in supersaturated calcium sulfate solution due to the interaction between PASP and Ca 2+ ions, and affected their solvent accessible surface area (SASA). In particular PASP 4–5 exhibited the smallest SASA and the strongest interaction with Ca 2+ ions, causing the longest setting time of α-HH.

Study on retarding feature and retardation mechanism of various retarding materials on gypsum as a construction material: A review

Sustainable Utilization of Finished Leather Wastes: A Novel Collagen Hydrolysate-Based Gypsum Additive with High-Retarding Performance

Effect of Bauxite/gypsum on Setting Time of the Grouting Material

Green and Effective Route to Convert Chromium-Free Leather Waste into Protein Retarding Material for Building Gypsum

Effects of several retarders on setting time and strength of building gypsum

The Influences of Soluble Phosphorus on Hydration Process and Mechanical Properties of Hemihydrate Gypsum under Deep Retarding Condition

Konjac Glucomannan Induced Retarding Effects on the Early Hydration of Cement

Retarding action of various chemicals on setting and hardening characteristics of gypsum plaster at different pH

Study on the Properties of By-product Gypsum As Cement Retarder from the Treatment Processing of Sulfur Chemicals Wastewater by Marble Polishing Powder

The chemical reagents influence on the regulation of the powder composite materials setting time for construction purposes

Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature

Effect of polyaspartic acid on the setting time and mechanical properties of α-hemihydrate gypsum

Retardation mechanism of phosphogypsum in phosphogypsum-based excess-sulfate cement

Effect of the Retarder on Initial Hydration and Mechanical Properties of the "one-step" Alkali-activated Composite Cementitious Materials

Utilization of solidified phosphogypsum as Portland cement retarder

Modification of phosphogypsum using circulating fluidized bed fly ash and carbide slag for use as cement retarder

Preparation and Hardening Performance of Lightweight Gypsum Mortar Based on Desulfurization Gypsum

An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement

Controllable setting time of alkali-activated materials incorporating sewage sludge ash and GGBS: The role of retarders