Abstract:Polyaspartic acid (PASP) was an environment-friendly and biodegradable polymer, with a protein-like structure composed of L-aspartic acid residues. In this work, PASP with different molecular weights (2000, 4000–5000 and 6000–8000) was utilized as the retarder for α-hemihydrate gypsum (α-HH), and the effect of PASP on the coagulation, hydration and crystallization process of gypsum were investigated. Results showed that the addition of PASP with a low dosage of 0.01% efficiently delayed the hydration of α-HH and prolonged the setting process. Among three polyaspartic acids, PASP with molecular weight of 4000–5000 (PASP 4–5) exhibited the best performance not only in postponing the setting time to 95 min, but also in decreasing the negative impact of retarder on the strength of gypsum. Significantly, the slightest loss of 2.65% in compressive strength was obtained here when compared with other retarders previously reported, under the lowest dosage of 0.01% PASP 4–5. Consequently, the effect of PASP chain length on the retardation of α-HH was analyzed in detail. The conductivity, heat of hydration, X-ray diffraction (XRD), EDTA titration method and scanning electron microscopy (SEM) characterization found that PASP prevented the dissolution of α-HH. Total organic carbon analyzer (TOC) and X-ray photoelectron spectroscopy (XPS) measurements showed that the carboxyl groups of PASP adsorbed on the surface of α-HH to hinder the dissolution of α-HH. The molecular dynamic simulation of PASP further exhibited that three kinds of PASPs presented different conformations in supersaturated calcium sulfate solution due to the interaction between PASP and Ca 2+ ions, and affected their solvent accessible surface area (SASA). In particular PASP 4–5 exhibited the smallest SASA and the strongest interaction with Ca 2+ ions, causing the longest setting time of α-HH.

Retarding action of various chemicals on setting and hardening characteristics of gypsum plaster at different pH

Effect of Bauxite/gypsum on Setting Time of the Grouting Material

Effects of several retarders on setting time and strength of building gypsum

The Influences of Soluble Phosphorus on Hydration Process and Mechanical Properties of Hemihydrate Gypsum under Deep Retarding Condition

Study on retarding feature and retardation mechanism of various retarding materials on gypsum as a construction material: A review

Effect of neutralization on the setting and hardening characters of hemihydrate phosphogypsum plaster

Effect of soluble phosphate, fluoride, and pH in Brazilian phosphogypsum used as setting retarder on Portland cement hydration

An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement

Retarding effect of gypsum for hybrid alkali-activated cements (HAACs) at ambient temperature

Effect of phosphatic and fluoride impurities of phosphogypsum on the properties of selenite plaster

The chemical reagents influence on the regulation of the powder composite materials setting time for construction purposes

Effect of polyaspartic acid on the setting time and mechanical properties of α-hemihydrate gypsum

Effect of Soluble Phosphorus on the Mechanical Properties of α-Hemihydrate Gypsum

Effect of citric acid on properties of recycled gypsum plaster to building components

Retardation mechanism of phosphogypsum in phosphogypsum-based excess-sulfate cement

Retardation effect of the pozzolanic reaction of low-calcium supplementary cementitious materials on clinker hydration at later age: Effects of pore solution, foreign ions, and pH

Investigation on the Unusual Hydration and Hardening Process of a Portland Cement with Low Alkali Sulfate Content

Effects of gypsum and phosphoric acid on the properties of sodium silicate-based alkali-activated slag pastes