Abstract:Phosphogypsum is an industrial waste generated in the production of fertilizers causing environmental problems. Calcined phosphogypsum (CPG) is obtained by low-temperature calcination and dehydration of phosphogypsum. CPG is mainly used to produce building materials. However, mechanical strength properties and water resistance of CPG materials is extremely poor, which leads to its relatively low utilization rate in construction industry. To address this issue, various amount of Ordinary Portland cement (OPC), fly ash (FA), rice husk (RH) and modified admixtures (AD) were mixed with the CPG to obtain CPG-based composite cementitious materials, which enhanced the water resistance and mechanical strength of the corresponding hardened materials. The influence of different contents of cement on the setting time, hydration heat, hydration products, mechanical properties, water absorption, heavy metal leaching and deterioration coefficient of the composite cementitious material is investigated. The results showed that the optimal mixing ratio of CPG: OPC: FA: RH was 57: 20: 10: 13 considering the water resistance and mechanical strength properties of CPG-based composite cementitious materials. On these conditions, the compressive strength, the flexural strength, water absorption and deterioration coefficient of the specimens at 28 days are 6.1 MPa, 4.6 MPa, 29.4% and 0.66 respectively, which were in line with the national standard of phosphorus building gypsum wallboard. It was demonstrated that two skeleton types are present in the samples prepared using CPG-based composite cementitious materials, which had a synergistic support effect on the structure. The first skeleton was formed by gypsum dihydrate crystals (CaSO 4 ·2H 2 O) and provided strength to the specimens at an early stage, while the second skeleton was formed by ettringite (AFt) and C–S–H gels, which provided strength at a later stage. The skeletons make the hardened materials denser and more waterproof. Moreover, the composite materials exhibited a positive solidification effect on heavy metals present in CPG.

Sustainable Utilization of Finished Leather Wastes: A Novel Collagen Hydrolysate-Based Gypsum Additive with High-Retarding Performance

Green and Effective Route to Convert Chromium-Free Leather Waste into Protein Retarding Material for Building Gypsum

Collagen hydrolyzed extract derived from leather waste as a multifunctional additive for the preparation of granular fertilizer

Effect of collagen hydrolysate obtained from leather waste on the setting, hydration and crystallization process of gypsum

Study on the Properties of By-product Gypsum As Cement Retarder from the Treatment Processing of Sulfur Chemicals Wastewater by Marble Polishing Powder

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

Enhancing the Performance of Hemihydrate Phosphogypsum by the Collaborative Effects of Calcium Hydroxide and Carbonation

Coordinated disposal of FGD gypsum and power plant concentrated brine via preparation of α-hemihydrate gypsum

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

Leather wastes into high-value chemicals: Keratin-based retanning agents via UV-initiated polymerization

Resource utilization and development of phosphogypsum-based materials in civil engineering

High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes

The Influences of Soluble Phosphorus on Hydration Process and Mechanical Properties of Hemihydrate Gypsum under Deep Retarding Condition

Upcycling of textile and footwear wastes for synergistical reinforcement of cement mortar

Gypsum and high quality binders derived from water treatment sediments and spent sulfuric acid: Chemical engineering and environmental aspects

Efficient treatment of leather wastewater using a combination of CEPT and SBR with a novel flocculant

Low cost and high efficiency utilization of hemihydrate phosphogypsum: Used as binder to prepare filling material

Recycling of waste gypsum from αlpha-hemihydrate phosphogypsum: Based on the atmospheric hydrothermal process

Development and optimization of phosphogypsum-based geopolymer cement