Abstract:Volatile organic compounds (VOCs) are important sources of atmospheric pollutants on account of their high recycling value. The membrane of dense silicone rubber polydimethylsiloxane (PDMS) has wide-ranging prospects for the separation and recovery of VOCs. In this study, PDMS membrane body models were established in BIOVIA Materials Studio (MS) to simulate VOCs with C3/N2 gases, and to study the structure of PDMS membranes and the dissolution and diffusion process of gas in the membranes. The free volume fraction (FFV), cohesive energy density (CED), radial distribution function (RDF), diffusion coefficient and solubility coefficient of C3H8, C3H6 and N2 in PDMS membranes were calculated, and the permeability coefficients were calculated according to these values. At the same time, the effects of temperature and mixed gas on the dissolution and diffusion of C3/N2 in PDMS membranes were investigated. The results show that the mass transfer process of C3 in PDMS membranes is mainly controlled by the dissolution process, while that of N2 is mainly controlled by the diffusion process. In a C3/N2 mixed gas system, there is a synergistic relationship between gases in the diffusion process, while there is competitive adsorption in the dissolution process. With an increase in temperature, the diffusion coefficients of the three gases in PDMS gradually increase, the solubility coefficients gradually decrease, and the overall permeability selectivity coefficients of the gases gradually decrease. Therefore, low-temperature conditions are more conducive to the separation of C3/N2 in PDMS membranes. The simulation results of the permeability selectivity coefficients of pure C3 and N2 in PDMS are similar to the experimental results, and the relationship between the micro- and macro-transport properties of PDMS membranes can be better understood through molecular simulation.

Preparation of PDMS/PVDF composite membrane and its application in C_3H_8/N_2 separation

Preparation of PDMS-PVDF composite flat-sheet membranes: Application in recovery of propane from propane-nitrogen mixture

SEPARATION OF PROPANE FROM PROPANE/NITROGEN MIXTURES USING PDMS COMPOSITE MEMBRANES BY VAPOR PERMEATION

Separation of propane from nitrogen using poly(dimethyl siloxane) thin film composite membranes

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Study of the Dissolution and Diffusion of Propane, Propylene and Nitrogen in Polydimethylsiloxane Membranes with Molecular Dynamics Simulation and Monte Carlo Simulation

Poly(dimethyl siloxane)/poly(vinylidene fluoride) composite membrane for separation of n-butane/nitrogen mixture

Preparation and gas separation properties of PDMS composite membrane materials

Separation of Propane/nitrogen Mixtures by Modified PDMS/PVDF Composite Membranes

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Hydrophobic-Functionalized Zif-8 Nanoparticles Incorporated Pdms Membranes for High-Selective Separation of Propane/Nitrogen

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Preparation of a novel dual-layer polyvinylidene fluoride hollow fiber composite membrane with hydrophobic inner layer for carbon dioxide absorption in a membrane contactor

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

Preparation of multi-layer PDMS/PVDF composite membranes for ethanol recovery from water by pervaporation

Pervaporation Performance of Polydimethylsiloxane/polyetherimide Composite Membrane for Separation of Thiophene/heptane Mixture(ⅰ) Effect of PDMS/PVDF Membrane Preparation Condition

PDMS/PVDF pervaporation composite membrane, preparation method and application thereof

Promoted Propylene/nitrogen Separation by Direct Incorporating 2-Methylimidazole into PDMS Membranes

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

Improving gas permeation performance of PDMS by incorporating hollow polyimide nanoparticles with microporous shells and preparing defect-free composite membranes for gas separation