Abstract:In this paper, a Ni coating was deposited on the surface of the A356 aluminum alloy by high velocity oxygen fuel spraying to improve the performance of the AZ91D magnesium/A356 aluminum bimetal prepared by a compound casting. The effects of the Ni coating as well as its thickness on microstructure and mechanical properties of the AZ91D/A356 bimetal were systematically researched for the first time. Results demonstrated that the Ni coating and its thickness had a significant effect on the interfacial phase compositions and mechanical properties of the AZ91D/A356 bimetal. The 10µm's Ni coating cannot prevent the generation of the Al-Mg intermetallic compounds (IMCs) at the interface zone of the AZ91D/A356 bimetal, while the Ni coating with the thickness of 45 µm and 190 µm can avoid the formation of the Al-Mg IMCs. When the Ni coating was 45 µm, the Ni coating disappeared and transformed into Mg-Mg2Ni eutectic structures+Ni2Mg3Al particles at the interface zone. With a thickness of 190µm's Ni coating, part of the Ni coating remained and the interface layer was composed of the Mg-Mg2Ni eutectic structures+ Ni2Mg3Al particles, Mg2Ni layer, Ni solid solution (SS) layer, Al3Ni2 layer, Al3Ni layer and sporadic Al3Ni+Al-Al3Ni eutectic structures from AZ91D side to A356 side in sequence. The interface layer consisting of the Mg-Ni and Al-Ni IMCs obtained with the Ni coating had an obvious lower hardness than the Al-Mg IMCs. The shear strength of the AZ91D/A356 bimetal with a Ni coating of 45 µm thickness enhanced 41.4% in comparison with that of the bimetal without Ni coating, and the fracture of the bimetal with 45µm's Ni coating occurred between the Mg matrix and the interface layer with a mixture of brittle fracture and ductile fracture.

Effect of Ni on the wear behavior of a zinc-aluminum alloy

Characterization of microstructure and wear behavior of nickel modified Zn-27% Al alloy casting

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-xNi-0.6Fe-0.6Mn alloys

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Microstructure, Mechanical, and Tribological Relationship in Cu-12Al-Ni Alloy with Respect to the Variation of Ni Content

Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

Enhancing microstructural, tribological and corrosion responses of Al–Zn–Mg–Cu alloy via nano-/micro-Al2O3 particulates

Analysis of Ni-Cu Interaction in Aluminum-Based Alloys: Hardness, Tensile and Precipitation Behavior

Studies of high temperature sliding wear of medium carbon Nickel-Chromium based alloy steel

Effect of Al/Ni Ratio on the Microstructure and Properties of Nickel-Aluminum Bronze Alloys

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating

Microstructure, Mechanical and Tribological Properties of Nickel-Aluminium Bronze Alloys Developed Via Gas-Atomization and Spark Plasma Sintering

Effect of Zr content on microstructure and wear behavior of Al-Si-Cu-Ni Mg-Zrx alloy

Thermal effects on wear behavior of additively manufactured NiTi shape memory alloys

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Investigations on microstructural, mechanical, and tribological properties of Al-Cu-Ni alloy in cast, heat-treated, and strain-softened conditions

Sliding Wear Behavior of Fully Nanotwinned Cu Alloys