Abstract:Recently, there"s been increased research interest in carbon fiber-reinforced polymer composites for additive manufacturing. Understanding the intricate effects of these reinforcements on the characteristics and properties of printed components is essential. This study aimed to evaluate the impact of carbon fibers on the chemical characteristics of 3D-printed poly(lactic acid) (PLA) and, consequently, its thermal, electrical, and mechanical properties. For this purpose, its features were compared to those of natural PLA printed under identical conditions. Chemical characterization utilized Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, and X-ray Diffraction (XRD), while thermal analysis employed Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) tests. Electrical properties were determined by resistance, resistivity, and conductivity measurements, while mechanical properties were assessed through various tests, including tensile, flexural, impact, and notch sensitivity, along with hardness measurements. Raman spectroscopy identified D and G bands in carbon fiber-reinforced PLA, while FTIR spectra indicated no chemical interactions of the fiber reinforcement with the PLA matrix. XRD patterns showed low crystallinity and pigment-associated peaks, highlighting specific peaks for crystalline PLA and carbon fiber in reinforced PLA. DSC results indicated an increase in PLA"s melting and crystallization temperatures with fiber incorporation, while TGA analysis revealed a decrease in the onset temperature of thermal decomposition for reinforced PLA. Carbon fiber reinforcement decreased tensile and flexural strength while enhancing elastic modulus and deformation under tension and flexion. Moreover, the impact energy necessary for PLA fracture rose with fiber incorporation. PLA hardness increased with the carbon fiber reinforcement. Fractographic analysis reveals that PLA polymer experiences intralayer brittle fractures, while carbon fiber-reinforced PLA composites exhibit interlayer fractures.

Assessment of carbon fiber incorporation effects on overall characteristics and properties of 3D-printed PLA

Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

Short carbon fiber-reinforced PLA composites: influence of 3D-printing parameters on the mechanical and structural properties

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

The Effect of Chopped Carbon Fibers on the Mechanical Properties and Fracture Toughness of 3D-Printed PLA Parts: An Experimental and Simulation Study

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling

Preparation and Evaluation of the Tensile Characteristics of Carbon Fiber Rod Reinforced 3D Printed Thermoplastic Composites

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

Mechanical Properties and Assessment of PLA Mixed with Carbon by Using Additive Manufacturing

Development of PLA/recycled-desized carbon fiber composites for 3D printing: Thermal, mechanical, and morphological analyses

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Preparation and Characterization for the Thermal Stability and Mechanical Property of PLA and PLA/CF Samples Built by FFF Approach

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure mechanisms

Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement

Effects of infill density on mechanical properties of additively manufactured chopped carbon fiber reinforced PLA composites

The fabrication of long carbon fiber reinforced polylactic acid composites via fused deposition modelling: Experimental analysis and machine learning

Tensile properties of 3D-printed CNT-SGF reinforced PLA composites

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Reinforcing Efficiency of Recycled Carbon Fiber PLA Filament Suitable for Additive Manufacturing