Abstract:Additive manufacturing of bamboo‐inspired continuous fiber reinforced multi‐matrix composites and the effects of parameters (nozzle temperature, printing speed, extrusion width and layer height) on mechanical properties. Inspired by the exceptional strength and toughness of fresh bamboo, a low‐cost method for preparing continuous fiber‐reinforced multi‐matrix composites based on 3D printing was proposed in this paper. Through the design of a special extrusion nozzle, the controllable feed of polylactic‐acid (PLA) and thermoplastic polyurethane (TPU) filaments was achieved, allowing for the preparation of continuous carbon fiber reinforced PLA/TPU composites. The effects of various process parameters on the tensile and flexural properties of the CCFR‐PLA/TPU composites were investigated. Additionally, the relationship between process parameters and the formation of the matrix‐fiber interface and PLA‐TPU interface was analyzed. The results show that layer height has the greatest influence on mechanical properties, while the printing speed has the least influence. The mechanical properties of the CCFR‐PLA/TPU composites and the unreinforced blend matrix, prepared using the optimal combination of process parameters, were tested. The results demonstrated that the tensile strength and flexural strength of the CCFR‐PLA/TPU composites increased by 16.95 and 1.80 times, respectively, compared to the unreinforced blend matrix. Further, inspired by the overall structure of bamboo, a stiffness gradient CCFR composite material was designed and prepared. The methodology employed in this study holds significant implications for the advancement of novel multi‐matrix hybrid continuous fiber reinforced composites, particularly in aerospace and related industries. Highlights Multi‐matrix continuous fiber reinforced composites were prepared by 3D printing inspired by fresh bamboo. The effects of process parameters (nozzle temperature, printing speed, extrusion width, layer height) on mechanical properties were investigated. The optimal printing parameter combination was determined by range analysis. Stiffness gradient composites were prepared inspired by the overall structure of bamboo.

Tensile properties of 3D-printed CNT-SGF reinforced PLA composites

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Comparative study of blending techniques in polylactic acid/cellulose nanofibrils green composites for benchtop 3D printing filaments

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Tensile Behavior of 3D Printed Polylactic Acid (PLA) Based Composites Reinforced with Natural Fiber

PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications

Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

Filaments Production and Fused Deposition Modelling of ABS/Carbon Nanotubes Composites

Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

Lignocellulose Nanofiber/polylactic Acid (LCNF/PLA) Composite with Internal Lignin for Enhanced Performance As 3D Printable Filament

The Effect of Chopped Carbon Fibers on the Mechanical Properties and Fracture Toughness of 3D-Printed PLA Parts: An Experimental and Simulation Study

Contribution of cellulose nanofibrils on the strengthening and toughening of neat and blended polylactide specimens; and the differences after 3D-printing

Assessment of carbon fiber incorporation effects on overall characteristics and properties of 3D-printed PLA

Effects of process parameters on mechanical properties and interface of 3D printed bamboo‐inspired CCFR‐PLA/TPU composites

Improved bond strength, reduced porosity and enhanced mechanical properties of 3D-printed polyetherimide composites by carbon nanotubes

Preparation and Evaluation of the Tensile Characteristics of Carbon Fiber Rod Reinforced 3D Printed Thermoplastic Composites

Design and fabrication of high-performance 3D printed continuous flax fibre/PLA composites

Mechanical properties of PLA-graphene filament for FDM 3D printing

Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications

ENHANCING POLYLACTIC ACID (PLA) FOR 3D PRINTING WITH CELLULOSE NANOFIBERS VIA TWIN SCREW MELT EXTRUSION