Abstract:Abstract. Wind data collection in the atmospheric boundary layer benefits from short-term wind speed measurements using unmanned aerial vehicles. Fixed-wing and rotary-wing devices with diverse anemometer technology have been used in the past to provide such data, but the accuracy still has the potential to be increased. A lightweight drone for carrying an industry-standard precision sonic anemometer was developed. Accuracy tests have been performed with the isolated anemometer at high tilt angles in a calibration wind tunnel, with the drone flying in a large wind tunnel and with the full system flying at different heights next to a bistatic lidar reference. The propeller-induced flow deflects the air to some extent, but this effect is compensated effectively. The data fusion shows a substantial reduction of crosstalk (factor of 13) between ground speed and wind speed. When compared with the bistatic lidar in very turbulent conditions, with a 10 s averaging interval and with the unmanned aerial vehicle (UAV) constantly circling around the measurement volume of the lidar reference, wind speed measurements have a bias between −2.0 % and 4.2 % (root-mean-square error (RMSE) of 4.3 % to 15.5 %), vertical wind speed bias is between −0.05 and 0.07 m s−1 (RMSE of 0.15 to 0.4 m s−1), elevation bias is between −1 and 0.7∘ (RMSE of 1.2 to 6.3∘), and azimuth bias is between −2.6 and 7.2∘ (RMSE of 2.6 to 8.0∘). Key requirements for good accuracy under challenging and dynamic conditions are the use of a full-size sonic anemometer, a large distance between anemometer and propellers, and a suitable algorithm for reducing the effect of propeller-induced flow. The system was finally flown in the wake of a wind turbine, successfully measuring the spatial velocity deficit and downwash distribution during forward flight, yielding results that are in very close agreement to lidar measurements and the theoretical distribution. We believe that the results presented in this paper can provide important information for designing flying systems for precise air speed measurements either for short duration at multiple locations (battery powered) or for long duration at a single location (power supplied via cable). UAVs that are able to accurately measure three-dimensional wind might be used as a cost-effective and flexible addition to measurement masts and lidar scans.

An innovative ultrasonic time of flight method based on extended Kalman filter for wind speed measurement

An accurate ultrasonic wind speed and direction measuring method by combining time-difference and phase-difference measurement using coded pulses combination

A Method to Avoid the Cycle-Skip Phenomenon in Time-of-flight Determination for Ultrasonic Flow Measurement

Arrival-Time Detection in Wind-Speed Measurement: Wavelet Transform and Bayesian Information Criteria

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Ultrasonic Wind Speed Measurement Based on Phase Shifting and Kalman Filter

Two Capacitive Micro-Machined Ultrasonic Transducers for Wind Speed Measurement

Similarity Judgment-Based Double-Threshold Method for Time-of-Flight Determination in an Ultrasonic Gas Flowmeter

Arrayed ultrasonic wind speed and direction measurement based on the BNF-FLOC-MUSIC algorithm

A Novel Ultrasonic Array Signal Processing Scheme for Wind Measurement

Line average wind speed measurement system of roadway cross-section based on ultrasonic transit time Difference

Method for Ultrasonic Time-of-flight Estimation Based on Extended Kalman Filter

Development of an Accurate and Robust Air-Coupled Ultrasonic Time-of-Flight Measurement Technique

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Determining Ultrasound Arrival Time by HHT and Kurtosis in Wind Speed Measurement

Towards accurate and practical drone-based wind measurements with an ultrasonic anemometer

Time Difference Detection Based on Sliding Window All-Phase FFT and Kalman Filtering for Precise Flow Measurement

A Three-Dimensional Ultrasonic Anemometer for Indoor Environmental Applications

A Spatiotemporal Estimation Framework for Real-World LIDAR Wind Speed Measurements

Wind speed and direction measurement based on arc ultrasonic sensor array signal processing algorithm

Adaptive Iteratively Reweighted Sine Wave Fitting Method for Rapid Wind Vector Estimation of Pulsed Coherent Doppler Lidar.