Abstract:A high-performance transparent conductor which is inexpensive, flexible and low-temperature deposited is essential for fabrication of a variety of printed electronic devices. Recently, copper nanomaterials have received increasing attention as a good candidate due to its low cost and plentiful supply. However, there are three crucial issues need to be addressed: (1) strong adhesion between printed copper nanomaterials and the flexible substrates, (2) anti-oxidation of copper nanomaterials in air and (3) the relative lower sintering temperature below the Tg of common polymer foils (e.g. PET). Here, a new approach based on the combination of mussel-inspired surface modification and patterning technology was developed to fabricate the transparent copper mesh. The approach involves (i) deposition of poly(dopamine) (PDA), an excellent stable adhesive on the flexible substrate in the aqueous dopamine solution at room temperature for several minutes, (ii) development of the PDA patterns via a simple and rapid photolithography or microcontact printing technique, and (iii) green electroless plating of copper only on the exposed PDA regions, the chemi-sorption sites of metal ions, without any catalyst at mild temperature. This approach enables an alternative to carbon nanotubes, graphene and silver nanowires based flexible transparent conductors and indium tin oxide based brittle transparent conductors. The micro structure, resistivity, transparency and peel strength of copper mesh were examined by scanning electron microscopy, four-point probe technique, UV-vis, 90° peel test. As a result, the smooth copper pattern exhibited uniform thickness, strong adhesion to substrate and low sheet resistance, which was still stable even stored in air for several months.

High-performance PEDOT: PSS/Cu mesh flexible transparent conductors with enhanced durability, adhesion and stability

Highly reliable flexible transparent conductors prepared with Cu/Ni grid by vacuum-free solution process

Site-selective Fabrication of Patterned Transparent Copper Mesh on Flexible Substrates at Mild Temperature for Green, Low Cost Electronics

Preparation of Highly Conductive Flexible Polyurethane Elastomers with Low PEDOT:PSS Content Based on a Novel Pore Collapse Strategy

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

A Catalytic and Interfacing PEDOT:PSS/CuPc Polymerized on Cloth Fiber to Electro‐Metalize Stretchable Copper Conductive Pattern

Copper Mesh Templated by Breath-Figure Polymer Films As Flexible Transparent Electrodes for Organic Photovoltaic Devices.

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Preparation of Flexible Highly Conductive Polyurethane Elastomers with Low PEDOT:PSS Content Based on Novel Feasible Pore Collapse Strategy for Flexible Conductor

High-Performance Transparent PEDOT: PSS/CNT Films for OLEDs

Modified PEDOT-PSS Conducting Polymer as S/D Electrodes for Device Performance Enhancement of P3HT TFTs

Highly Conductive, Ultrastrong, and Flexible Wet-Spun PEDOT:PSS/Ionic Liquid Fibers for Wearable Electronics

Highly conductive sandwich-structured CNT/PEDOT:PSS/CNT transparent conductive films for OLED electrodes

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

Enhanced conductivity and stability of Cu-embedded zinc tin oxide flexible transparent conductive thin films

Novel Ag‐Mesh Transparent Hybrid Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Solar Cells

Solution-processed Copper Nanowire Flexible Transparent Electrodes with PEDOT:PSS As Binder, Protector and Oxide-Layer Scavenger for Polymer Solar Cells

Simultaneously enhanced performances of flexible CuNW networks by covering ATO layer for polymer solar cells

Passivation coating on electrospun copper nanofibers for stable transparent electrodes.

Incorporation of Single-Walled Carbon Nanotubes with PEDOT/PSS in DMSO for the Production of Transparent Conducting Films