Abstract:Transparent conducting electrodes (TCEs) are an essential component for modern opto-electronic devices such as solar cells, organic light emitting diodes (OLEDs), liquid crystal displays (LCDs), and touch screen panels. However, traditional indium tin oxide (ITO) cannot meet the demand for the next generation highly flexible TCEs, and thus many novel alternative materials and technologies are blooming, such as super-aligned carbon nanotube, graphenes, conducting polymer and metal nanowire and so on. Among them, silver nanowires (Ag NWs) have been considered as one of the most promising technologies for TCEs, featured with superior electrical and optical properties. However, there are still two major challenges for Ag NWs-based TCEs technology to overcome. One is the poor mechanical interconnection between the Ag NWs conducting networks and transparent substrate, the other is the high contact resistance of the junctions among Ag NWs. Here we report a novel two-step electrostatic spraying process to fabricate Ag NWs TCEs composite with selectively coated conductive polymer, i.e. poly 3,4-ethylenedioxythiophene: polystyrenesulfonate (PEDOT:PSS). Additionally, we applied plasma treatment to the materials between two-step electrostatic spraying process, which rendered sintering of junctions between the Ag NWs at room temperature, and thus increasing the conductivity of the TCEs by at least three orders of magnitude. Results showed that by adjusting the electrostatic spraying process parameters, selective deposition can be achieved, i.e. the conductive polymer could tightly bound to the Ag NWs network. As compared to an even distribution of the coating layer in the whole area, selective coating rendered the negligible loss of transmittance (0.2% at most) and excellent adhesion to the substrate. Moreover, the composited TCEs exhibited 85.3% mean optical transmittance and 35.8 Omega/sq sheet resistance. Based on our results, we believe that this technology can be used for roll-to-roll preparation of silver nanowires (Ag NWs)-based TCEs.

Highly conductive sandwich-structured CNT/PEDOT:PSS/CNT transparent conductive films for OLED electrodes

High-Performance Transparent PEDOT: PSS/CNT Films for OLEDs

Modification of carbon nanotube transparent conducting films for electrodes in organic light-emitting diodes

Highly transparent, low sheet resistance and stable Tannic acid modified-SWCNT/AgNW double-layer conductive network for organic light emitting diodes

Strong adhesion and high optoelectronic performance hybrid graphene/carbon nanotubes transparent conductive films for green-light OLED devices

Incorporation of Single-Walled Carbon Nanotubes with PEDOT/PSS in DMSO for the Production of Transparent Conducting Films

Low-temperature nanowelding silver nanowire hybrid flexible transparent conductive film for green light OLED devices

Fabrication of flexible multilayer transparent electrode based on silver nanowire, graphene oxide, and poly(3,4-ethylenedioxythiophene): polystyrene sulfonate

Quasi- Freestanding" Graphene- On- Single Walled Carbon Nanotube Electrode for Applications in Organic Light- Emitting Diode

Fabrication of high-quality flexible transparent conductive thin films with a Nb2O5/AgNWs/Nb2O5 sandwich structure

Electrospray deposition of carbon nanotube thin films for flexible transparent electrodes

Solution-processed Copper Nanowire Flexible Transparent Electrodes with PEDOT:PSS As Binder, Protector and Oxide-Layer Scavenger for Polymer Solar Cells

Highly reliable flexible transparent conductors prepared with Cu/Ni grid by vacuum-free solution process

Piezoelectric dispenser printing and intense pulse light sintering of AgNW/PEDOT:PSS hybrid transparent conductive films

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells

Highly Conductive PEDOT:PSS Film by Post-Treatment with Dimethyl Sulfoxide for ITO-Free Liquid Crystal Display

p-Type Doping of Gold Nanoparticles on Ellagic Acid Noncovalently Modified Single-Walled Carbon Nanotubes Compositing with PEDOT:PSS Bilayer Films for Organic Light-Emitting Diodes

High performance silver nanowire based transparent electrodes reinforced by conductive polymer adhesive

Multiwall carbon nanotube and poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) composite films for transistor and inverter devices

Induced electrical polarization and conductivity homogenization via internal architectural regulation in PC/PVDF/MWCNTs/PEDOT:PSS transparent conductive films

Novel Transparent TiO 2 /AgNW–Si(NH 2 )/PET Hybrid Films for Flexible Smart Windows