Abstract:Graphene materials synthesized using direct laser writing (laser-induced graphene; LIG) make favorable sensor materials because of their large surface area, ease of fabrication, and cost-effectiveness. In particular, LIG decorated with metal nanoparticles (NPs) has been used in various sensors, including chemical sensors and electronic and electrochemical biosensors. However, the effect of metal decoration on LIG sensors remains controversial; hypotheses based on computational simulations do not always match the experimental results, and even the experimental results reported by different researchers have not been consistent. In the present study, we explored the effects of metal decorations on LIG gas sensors, with NO2 and NH3 gases as the representative oxidizing and reducing agents, respectively. To eliminate the unwanted side effects arising from metal salt residues, metal NPs were directly deposited via vacuum evaporation. Although the gas sensitivities of the sensors deteriorate upon metal decoration irrespective of the metal work function, in the case of NO2 gas, they improve upon metal decoration in the case of NH3 exposure. A careful investigation of the chemical structure and morphology of the metal NPs in the LIG sensors shows that the spontaneous oxidation of metal NPs with a low work function changes the behavior of the LIG gas sensors and that the sensors' behaviors under NO2 and NH3 gases follow different principles.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the influence of metal doping on the performance of laser - induced graphene (LIG) gas sensors, especially for two typical oxidizing and reducing gases, NO₂ and NH₃. Specifically, the researchers hope to understand how metal doping changes the electronic structure of LIG and its interaction mechanism with gas molecules, so as to optimize the performance of flexible gas sensors based on LIG. ### Problem Background 1. **Advantages of LIG Materials** - Large specific surface area, easy to manufacture, and low cost. - It can be rapidly prepared on a flexible substrate by the direct laser writing (DLW) method. 2. **Influence of Metal Doping** - There are inconsistencies between theoretical calculations and experimental results, and the experimental results reported by different researchers are also not exactly the same. - Metal doping may change the electrical properties of LIG, thereby affecting its gas - response characteristics. ### Research Objectives 1. **Explore the Influence of Metal Doping on LIG Gas Sensors** - Use NO₂ (oxidizing gas) and NH₃ (reducing gas) as representative gas analytes to study the influence of metal doping on the performance of LIG sensors. 2. **Clarify the Specific Effects of Metal Doping** - Verify the deposition method of metal nanoparticles (NPs) (such as vacuum evaporation) through experiments to avoid the side effects caused by metal salt residues. - Analyze the chemical structure and morphology of metal NPs and explore their specific effects on the behavior of LIG gas sensors. 3. **Reveal Different Gas Sensing Mechanisms** - Study the adsorption and desorption processes of NO₂ and NH₃ gases on metal - doped LIG and explain their different sensing mechanisms. ### Experimental Design 1. **Material Preparation** - Prepare LIG on a flexible polyimide (PI) substrate and deposit different types of metal NPs (Ag, Al, Au, Cu, In, Pd) on its surface by vacuum evaporation. 2. **Performance Testing** - Test the response characteristics of LIG sensors to NO₂ and NH₃ gases at different temperatures and determine the optimal working temperature. - Compare the sensitivity differences between pure LIG (P - LIG) and metal - doped LIG (M - LIG) at different gas concentrations. ### Main Findings 1. **Influence of Metal Doping on NO₂ Response** - Regardless of the metal work function, the sensitivity of the LIG sensor to NO₂ generally decreases after metal doping. - This phenomenon cannot be simply attributed to the work function difference between metal NPs and LIG, but is due to complex interactions, including the spontaneous oxidation of metal NPs, etc. 2. **Influence of Metal Doping on NH₃ Response** - For NH₃ gas, certain metal dopings can improve the sensitivity of the LIG sensor. - Specifically, the response of LIG doped with Al, Cu, and Pd to NH₃ is enhanced, while there is no obvious change in Ag, Au, and In doping. ### Conclusion This study provides guidance for selecting appropriate metal dopants to optimize 3D - structured graphene gas sensors, which is helpful for developing high - performance flexible LIG gas sensors. In addition, the study also reveals the influence of metal doping on the electronic structure of graphene, which is also of great significance for other carbon - based applications (such as supercapacitors, fuel cells, etc.). ### Key Formulas - Relative response rate formula: \[ \Delta R/R_0 (\%)=\left(\frac{R_g - R_0}{R_0}\right)\times100 \] where \(R_g\) is the resistance in the gas, and \(R_0\) is the resistance in nitrogen. - Tuinstra - Koenig relationship for calculating grain size: \[ L_a=\frac{2.4\times 10^{-10}\times\lambda_l^4}{I_G/I_D} \]

Investigation of Laser-Induced Graphene (LIG) on a Flexible Substrate and Its Functionalization by Metal Doping for Gas-Sensing Applications

Metal Decoration Effects on the Gas-Sensing Properties of 2D Hybrid-Structures on Flexible Substrates

In situ laser-assisted synthesis and patterning of graphene foam composites as a flexible gas sensing platform

High sensitivity low-temperature ethanol and acetone gas sensors based on silver/titanium oxide decorated laser-induced graphene

Physical and Chemical Sensors on the Basis of Laser-Induced Graphene: Mechanisms, Applications, and Perspectives

Laser-Induced Graphene for Advanced Sensing: Comprehensive Review of Applications

Highly sensitive NO2 sensors by pulsed laser deposition on graphene

Multifunctional metal–organic frameworks nanoengineered laser-induced graphene for health electronics

Solid-state, reagent-free and one-step laser-induced synthesis of graphene-supported metal nanocomposites from metal leaves and application to glucose sensing

Graphene Nanocomposite Ink Coated Laser Transformed Flexible Electrodes for Selective Dopamine Detection and Immunosensing

Laser-induced fibers and copper phthalocyanine modified laser-induced graphene electrodes for sensitive and selective electrochemical detection of nitrite

Intrinsically Breathable and Flexible NO 2 Gas Sensors Produced by Laser Direct Writing of Self-Assembled Block Copolymers

(Invited) Laser-Induced Graphene for Improved Electrochemical Biosensors

Multifunctional Biosensing Platform Based on Nickel-Modified Laser-Induced Graphene

Enhancing Laser-Induced Graphene via Integration of Gold Nanoparticles and Titanium Dioxide for Sensing and Robotics Applications

Development of an NO2 Gas Sensor Based on Laser-Induced Graphene Operating at Room Temperature

A Facile and Efficient Nitrite Electrochemical Sensor Based on N, O Co-Doped Porous Graphene Film

Disposable Paper-Based Biosensors: Optimizing the Electrochemical Properties of Laser-Induced Graphene

Facile fabrication of laser induced versatile graphene-metal nanoparticles electrodes for the detection of hazardous molecules

Three-Dimensional (3D) Laser-Induced Graphene: Structure, Properties, and Application to Chemical Sensing

A Mediated Enzymatic Electrochemical Sensor Using Paper-Based Laser-Induced Graphene