Abstract:Graphical and Lay Summary The heterogenous production conditions in large‐scale bioreactors cause scale‐up problems, such as reduced biomass or product yield, to occur during bioprocesses. In this study, we designed a two‐compartment scale‐down reactor and used it to simulate large‐scale heterogenous production conditions, allowing us to understand these scale‐up problems and identify solutions at the laboratory scale. A computational fluid dynamics simulation was used for the design and detailed characterization of the scale‐down setup, as this simulation can model the production scale and support improved bioprocess scale‐up in the future. The scale‐up of bioprocesses remains one of the major obstacles in the biotechnology industry. Scale‐down bioreactors have been identified as valuable tools to investigate the heterogeneities observed in large‐scale tanks at the laboratory scale. Additionally, computational fluid dynamics (CFD) simulations can be used to gain information about fluid flow in tanks used for production. Here, we present the rational design and comprehensive characterization of a scale‐down setup, in which a flexible and modular plug‐flow reactor was connected to a stirred‐tank bioreactor. With the help of CFD using the realizable k‐ε model, the mixing time difference between a 20 and 4000 L bioreactor was evaluated and used as scale‐down criterion. CFD simulations using a shear stress transport (SST) k‐ω turbulence model were used to characterize the plug‐flow reactor in more detail, and the model was verified using experiments. Additionally, the model was used to simulate conditions where experiments technically could not be performed due to sensor limitations. Nevertheless, verification is difficult in this case as well. This was the first time a scale‐down setup was tested on high‐cell‐density Escherichia coli cultivations to produce industrially relevant antigen‐binding fragments (Fab). Biomass yield was reduced by 11% and specific product yield was reduced by 20% during the scale‐down cultivations. Additionally, the intracellular Fab fraction was increased by using the setup. The flexibility of the introduced scale‐down setup in combination with CFD simulations makes it a valuable tool for investigating scale effects at the laboratory scale. More information about the large scale is still necessary to further refine the setup and to speed up bioprocess scale‐up in the future.

Impinging Flow Reactor as a New Approach to Scaling-Up Microreactors for Enhanced Extraction and Separation of Zinc from Cadmium and Manganese

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Flow Field Design Pathways from Lab-Scale Toward Large-Scale Flow Batteries

Strategy for Scaling‐up of a Microsieve Dispersion Reactor

Effect Of The Scale-Up Process On The Reactor Performance Within The Riser: Simulation Using Ozone Decomposition

Scale-up of micro- and milli-reactors : An overview of strategies, design principles and applications

Optimized design of macro‐microreactor for scale‐up of liquid–liquid chemical processes

Simulation for Scale-Up of a Confined Jet Mixer for Continuous Hydrothermal Flow Synthesis of Nanomaterials

Study and Actual Application of the Electrochemical Reactor in Flow-Through Mode Based on Channel Confinement

Micromixing Study of a Clustered Countercurrent-Flow Micro-Channel Reactor and Its Application in the Precipitation of Ultrafine Manganese Dioxide

Flow Simulation and Experimental Study of a Dynamic Asymmetric Impinging Stream

Micromixing and Co-Precipitation in Continuous Microreactors with Swirled Flows and Microreactors with Impinging Swirled Flows

CFD Analysis of Flow Patterns and Micromixing Efficiency in a Y-Type Microchannel Reactor

Experimental and Numerical Investigation on the Scaling-Up of Microsieve Dispersion Mixers

Application of the engulfment model in assessing micromixing time of a micro-impinging stream reactor based on the determination of impinging zone with CFD

A Novel Radial Flow Microchannel Separator for Efficient Micro/nano Sized Pollutants Removal from Industrial Wastewater

Computational fluid dynamics simulation improves the design and characterization of a plug‐flow‐type scale‐down reactor for microbial cultivation processes

CO2 reduction in a microchannel electrochemical reactor with gas-liquid segmented flow

Structural Optimization of Reactor for the Enhancement of CO2 Electrochemical Reduction Based on Gas–Liquid Mixing Flow Model

Liquid-liquid Flow and Mass Transfer Characteristics in a Miniaturized Annular Centrifugal Device