Abstract:In the current technological landscape, lithium metal batteries have significantly surpassed the energy density of conventional lithium-ion batteries. Therefore, The advent of anode-free lithium metal batteries (AFLMBs) offers higher energy densities.. They also provide advantages such as reduced process complexity and lower costs due to their design that eliminates the need for anode materials. Unlike the lithium-ion insertion and extraction reactions in traditional lithium-ion batteries. This makes them easier to lithium dendrite formation, which can puncture the separator or solid electrolytes, among other issues. In this work, we developed anin-operando electron microscopic technique with a unique vacuum square-cell design to ensure air-tight transfer of in-operandocells with vacuum protection into the SEM chamber. We significantly improved the imaging resolution with a windowless design, enabling the direct electron beam to focus on the electrode interfaces. Thus, real-time imaging of Li growth could be achieved via a stable current supply and controlled temperature. we systematically analyzed the Li growth and dendrite propagation behavior in AFLMBs using solid polymer electrolyte (SPE). In particular, we used polyethylene oxide (PEO)-based SPEs containing different lithium salts, namely 25wt% Lithium bis(trifluoromethanesulfonyl)imide ( LiTFSI ), Lithium difluoro (oxalateo)borate ( LiDFOB ), and Lithium bis(oxalate)borate ( LiBOB ), within a LiFePO 4 ||Cu anode-free cell configuration. Under a fixed current density, Li deposition and stripping were conducted, in which the PEO-LiTFSI SPE exhibited uniform deposition with a mossy lithium dendrite morphology. In the subsequent deposition process, some branching lithium dendrites were observed. Meanwhile, PEO-LiBOB showed uneven Li deposition with needle-like dendritic formation, potentially disrupting the SPE/electrode interface and leading to safety hazards. Lastly, PEO-LiDFOB initially showed mossy lithium deposition. In contrast, a few dendritic lithium structures appeared as the deposition process continued into the intermediate and later stages. The study successfully established a novel in-situ electron microscopy observation platform isolating water and oxygen. This platform recreated the actual battery operating environment, enhancing the credibility of experimental results. Additionally, we successfully elucidated the growth mechanisms of lithium dendrites in SPE with different lithium salts in the LFP||Cu configuration. This in-situ microscope technology aims to observe the relevant mechanisms behind dynamic deposition. Understanding how this deposition affects battery performance and safety and combining it with advanced operational and ex-situ characterization techniques can further promote the development of all-solid -state batteries in the future.

Regulated Li Electrodeposition Behavior through Mesoporous Silica Thin Film in Anode-Free Lithium Metal Batteries

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Dynamically lithium-compensated polymer artificial SEI to assist highly stable lithium-rich manganese-based anode-free lithium metal batteries

Regulating Li Nucleation and Growth Heterogeneities via Near‐Surface Lithium‐Ion Irrigation for Stable Anode‐Less Lithium Metal Batteries

Lithium Dendrite Propagation in Anode-Free Lithium Metal Batteries: An in-Operando Scanning Electron Microscopic Study

Regulating Lithium Electrodeposition with Laser-Structured Current Collectors for Stable Lithium Metal Batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Stabilizing Interface Between Li10SnP2S12 and Li Metal by Molecular Layer Deposition

Mesoporous Gold Film with Surface Sulfur Modification to Enable Dendrite‐Free Lithium Plating/Stripping for Long‐Life Lithium Metal Anodes

Regulating the Li Nucleation/Growth Behavior via Cu 2 O Nanowire Array and Artificial Solid Electrolyte Interphase toward Highly Stable Li Metal Anode

A High-Current Initiated Formation Strategy for Improved Cycling Stability of Anode-Free Lithium Metal Batteries

Anode‐Free Li Metal Batteries: Feasibility Analysis and Practical Strategy

Guiding Smooth Li Plating and Stripping by a Spherical Island Model for Lithium Metal Anodes

Modulating the Inner Helmholtz Plane towards Stable Solid Electrolyte Interphase by Anion‐π Interactions for High‐Performance Anode‐Free Lithium Metal Batteries

Development of Anode-Free Lithium Metal Batteries

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries

A “breathable” 3D Lithium Host with MnO2 Nanoflake Array for Long-Lifespan Anode-Free Lithium Metal Batteries

Toward High‐Energy‐Density Initial‐Anode‐Free Lithium‐Metal Batteries via Ultra‐Thin Protective Ion‐Transport‐Promoting Interface Modification and Surface Prelithiation

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

Rational Tuning of a Li 4 SiO 4 -Based Hybrid Interface with Unique Stepwise Prelithiation for Dendrite-Proof and High-Rate Lithium Anodes