Abstract:Anode free Li metal battery (AFLMB) are being intensively investigating in recent years as a means to achieve higher capacity when compared with standard Li metal batteries. However, the severe electrolyte decomposition during plating/stripping cycles, that causes fast Li dendrite growth and quick capacity fading, is challenging for its commercialization. Herein, poly (vinylidene fluoride-hexafluoropropylene) polymer containing Li 1.6 Al 0.4 Mg 0.1 Ge 1.5 (PO 4 ) 3 ceramic filler (90:10 w% ratio, PVDF-HFP-10) gel polymer electrolyte (GPE) is employed for the first time in AFLMB to suppress the Li dendrite growth and homogeneous Li deposition is achieved during Li metal plating/stripping. The PVDF-HFP-10 based membrane is manufactured using electrospinning technique, which is well known and effective technique to increase the amount of crystalline β-phase of PVDF-HFP, on Cu collector foil. Particularly, a pure crystalline β-phase of PVDF-HFP has been observed in the adhesion layer sticked with Cu collector as confirmed from the analysis of Fourier Transform Infrared Spectroscopy (FTIR) and Raman spectroscopy measurements. The adhesion layer is further investigated using X-ray absorption spectroscopy (XAS), grazing angle X-ray diffraction (GAXRD) and X-ray photoelectron spectroscopy (XPS) techniques. The GAXRD analysis reveals Cu collector undergoes slight reconstruction of its (100) facets surface to (200) facets in the presence of the adhesion layer. Moreover, depth XPS analysis confirmed that the alignment of F atoms in the adhesion layer is toward the Cu collector which can play an important role for homogeneous Li deposition. Based on these findings, a novel approach is developed to prepare GPE, without peeling off the electrospun PVDF-HFP membrane from Cu collector to take advantage of the adhesion layer. The electrospun PVDF-HFP membrane GPE unpeeled off from its Cu collector (Cu@PVDF-HFP-10) prepared using novel method provides bifunctional applications, as electrolyte and as an artificial solid-electrolyte interphase (ASEI). The strong electrostatic interaction between the fiber sheet and its collector foil forms an adhesion layer (⁓0.5μm) which acts as ASEI prevents electrolyte decomposition. The Cu@PVDF-HFP-10|Li anode free cell enables uniform and highly compacted Li platting, excellent electrochemical performance, and high coulombic efficiency (CE) even at a high current density up to 5 mA cm − 2 (CE, 97.14%) after 200 cycles using 2 mAh cm − 2 capacity loading. Conversely, nonuniform and thick Li deposition is observed in the GPE prepared by conventional method (PVDF-HFP-10), due to poor contact between the membrane and the electrode, achieved only 90.08% CE after 100 cycles at 5 mA cm − 2 . Post-cycling analyses using titration- gas chromatography ( TGC ) and XPS techniques indicated that the new strategy is conducive to prevent dead Li metal formation as well as to create a carbonate-free, robust, and stable SEI convenient to develop sustainable AFLMB system. Cycling performance of the Cu@PVDF-HFP-10 GPE utilized in the Cu|NMC AFLMB configuration delivered much better electrochemical performance than the PVDF-HFP-10 GPE (prepared by traditional method) and organic liquid electrolytes.

Dynamically lithium-compensated polymer artificial SEI to assist highly stable lithium-rich manganese-based anode-free lithium metal batteries

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Constructing Stable Solid Electrolyte Interphase Using Gel Polymer Electrolytes for Anode-Free Lithium Metal Batteries with Enhanced Cycle Life

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Synergy of strong/weak interface adhesion forces and Li2S additive enabling high performance full anode-free lithium-metal batteries

A High-Current Initiated Formation Strategy for Improved Cycling Stability of Anode-Free Lithium Metal Batteries

Mitigating dendrite formation and electrolyte decomposition via functional double layers coating on copper current collector in anode-free lithium metal battery

Toward High‐Energy‐Density Initial‐Anode‐Free Lithium‐Metal Batteries via Ultra‐Thin Protective Ion‐Transport‐Promoting Interface Modification and Surface Prelithiation

Stabilizing Interface Between Li10SnP2S12 and Li Metal by Molecular Layer Deposition

Development of Anode-Free Lithium Metal Batteries

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Lithium Dendrite Growth Suppression in Anode-Free Lithium Battery Using Bifunctional Electrospun Gel Polymer Electrolyte Membrane

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

Regulated Li Electrodeposition Behavior through Mesoporous Silica Thin Film in Anode-Free Lithium Metal Batteries

A Li2CO3 sacrificial agent for anode-free lithium metal batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Functional Copolymer Derived Self‐Adapting LiF‐Rich Interphase Toward Deep Cycling Lithium Metal Batteries

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries

Artificial Single-Ion Conducting Polymer Solid Electrolyte Interphase Layer toward Highly Stable Lithium Anode

Dendrite-free Li-metal anode via a dual-function protective interphase layer for stable Li-metal pouch cell

Regulating Li Nucleation and Growth Heterogeneities via Near‐Surface Lithium‐Ion Irrigation for Stable Anode‐Less Lithium Metal Batteries