Abstract:This study explores the electropulsing‐assisted solution (EAS) process for TiB2/Al composites, revealing how EAS enhances microstructure and mechanical properties. EAS boosts phase dissolution for only 15 min without overburning, stabilizes grain size, and improves strength and elongation. This study provides an approach to achieve an efficient dissolution of phases in particle‐reinforced Al matrix composites via electropulsing techniques. The traditional solution treatment is not completely applicable for in situ TiB2/Al–Zn–Mg–Cu composite due to the influence of TiB2 particles. This study investigates the impact of the electropulsing‐assisted solution (EAS) process on the microstructure evolution and mechanical properties of TiB2/Al–Zn–Mg–Cu composites. The nonuniform microstructure evolution related to the difference in temperature and current density is supported by simulative and experimental results. EAS treatment significantly enhances the degree of supersaturation, allowing phases surrounding TiB2 particles to dissolve without extensive overburning, unlike traditional solution treatments. This improvement is attributed to the reduced thermodynamic barrier and accelerated atomic diffusion, facilitated by both localized and average Joule heating effects and enhanced thermal electron/phonon scattering. Meanwhile, grain size remains stable during the temperature rise induced by EAS treatment. Furthermore, the mechanical properties of composites increase, among which the increase in strength is mainly ascribed to solid–solution strengthening, and the increase in elongation is related to multiple factors referring to TiB2 particles fracture and interface crack between the undissolved phases and matrix. This study provides an approach to achieve an efficient dissolution of phases aggregated with particles and without widespread overburning in particle‐reinforced Al matrix composites via electropulsing techniques.

Re -dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites

Effect of aging treatment on the microstructure and mechanical properties of TiO2@CNTs/2024 composite

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

The Influence of Cryogenic Treatment on the Microstructure and Mechanical Characteristics of Aluminum Silicon Carbide Matrix Composites

Precipitation behavior and mechanical properties of Al-Zn-Mg-Cu matrix nanocomposites: Effects of SiC nanoparticles addition and heat treatment

Effect of a Novel Thermomechanical Treatment on Microstructure and Mechanical Properties of 7034 Aluminum Alloy

Microstructure and Mechanical Properties of the AlCrFeCoNip/AZ91D Composites After Heat Treatment

Effect of Precipitation Heat Treatment on a Mechanically Alloyed Al‐Based Composite Reinforced with Metallic Glassy Powder

Mechanical properties of CNT-reinforced Ni3Al composites: the role of chirality, temperature, and volume fraction

Effects of Solution Treatment on Microstructure Transformation, Tensile and Exfoliation Corrosion Properties of 7136 Aluminum Alloy

Microstructure Evolution and Mechanical Properties of In Situ TiB2/Al–Zn–Mg–Cu Composites by Electropulsing‐Assisted Solution Treatment

Investigation of Microstructures and Mechanical Properties of SiC/AA2024 Nanocomposites Processed by Powder Metallurgy and T6 Heat Treatment

The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Unraveling hot deformation behavior and microstructure evolution of nanolamellar TiAl/Ti3Al composites

Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy

Effects of Solution Treatment on Microstructure Evolution and Mechanical Properties of Ti-22Al-24Nb-0.5Mo Alloy

Microstructure Evolution and Mechanical Properties of TiB2/Al–Cu–Mn–Cd Composite with the Adoption of Two-Stage Solution and Aging Treatment

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Effect of heat treatments on microstructure and mechanical properties of sand cast Al–2Li–2Cu–0.5Mg–0.2Sc–0.2Zr alloy