Abstract:Glass fiber reinforced polymer laminated (GFRPL) composites are extensively used in the development of multiple loading and high performance engineering components. It consists of greater properties, such as enhanced strength-to-weight ratio, and exceptional thermal stability. This plays a vital role in advanced composite manufacturing, that includes automobile parts, aeroplane parts, spaceships, and sporting goods. During manufacturing, the polymeric laminates essentially require the joining procedure while assembling the structural applications; in such cases, the bolted joint is frequently used to connect the different structural components. In the structural design of two-component joints, the component is governed by the durability and joint strength rather than the component capacity. In the joint setup, many types of joints are used to connect the fibrous composite, i.e., adhesive joint, bolted joint, and riveted joint. This work enhanced the riveted joint efficiency of laminated composite plates. The neat GFRPL and modified GFRPL samples were developed at 1, 2, and 3 Wt.% loading of multiwall carbon nanotube (MWCNT). Herein, the effect of MWCNT on single-lap riveted joining behavior and feasibility was investigated. The lap joint aluminum blind rivet with a 5 mm diameter was used to join the two composites' specimens. The tensile test of single lap riveted joint specimen, impact, and Shore D hardness tests were performed to analyze the composite's shear strength, energy absorption, and hardness. The outcome showed that the MWCNT loading enhances the shear strength, ductility, and hardness. The findings revealed that the higher shear strength and maximum failure load capacity were obtained for GFRPL samples modified by 1 Wt.% supplement of MWCNT as compared to the neat GFRPL, 2 and 3 Wt.% samples. The net tension failure occurred between the hole and the structure's side edges. Optimizing the geometrical configuration of the single-lap riveted joint helps reduce bearing failure and applied net tension. The analysis of the riveted joint revealed its potential for further structural applications. Further, the morphological investigation of the fracture surface of the tested specimens and the elemental composition of the developed nanocomposites was explored.

A comprehensive investigation on tensile behavior of surface‐modified Kevlar hybrid nanocomposites for similar and dissimilar joints

Surface modification of Kevlar fibre fabric and its influence on the properties of Kevlar/epoxy composites

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate

Comparative fracture surface analysis of adhesively bonded dissimilar lap joints: Nanosilica effect

Investigation of the mechanical and thermal properties of epoxy adhesives reinforced by carbon nanotubes and silicon dioxide nanoparticles in single-lap joints

Effect of adhesive modification and surface treatment of laminates on the single lap bonding joint properties of carbon fibre composites

Improving the Efficiency of Single Lap Riveted Joints in the Carbon Nanofiller Reinforced Laminated Polymer Composites

Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads

Adhesion strength and mechanical properties of nanoclay modified hybrid kevlar/jute‐epoxy fiber metal laminate

Effect of surface modified adherend and nanofiller modified adhesives on the shear behaviour of single lap joints: a mini review

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Finite element analysis of load-carrying capacity of single lap joints bonded with epoxy/nanoalumina adhesives

Mechanical characterization and performance evaluation of twisted Jute-Kevlar hybrid composites with varied fiber orientations

Mechanical and low velocity impact behaviour of intra-ply glass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite

Influence of fiber surface treatments and hybridization on interply and intraply Kevlar reinforced polymer composites

Mechanical study on hybrid joining type carbon fiber reinforced composite

Lap shear properties of CF/PEKK composites through nanoparticle-enhanced adhesive joints

Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites

Inactivated Quadrivalent Split-Virus Seasonal Influenza Vaccine (Fluarix® Quadrivalent): A Review of Its Use in the Prevention of Disease Caused by Influenza A and B

The Carbon Nanotubes Effect into Single-lap Joint Failure Modes and Load Capacity: a Macromechanical Analysis

Evaluating structural strength and vibrational characteristics of silicon carbide incorporated adhesively bonded single lap joints