2D hybrid CrCl 2 (N 2 C 4 H 4 ) 2 with tunable ferromagnetic half-metallicity

Wentao Hu,Ke Yang,Alessandro Stroppa,Alessandra Continenza,Hua Wu

DOI: https://doi.org/10.1039/d1tc00518a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:CrCl 2 (N 2 C 4 H 4 ) monolayer: an appealing 2D ferromagnetic half-metal.

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

2D hybrid CrCl2(N2C4H4)2 with tunable ferromagnetic half-metallicity

Wentao Hu,Ke Yang,Alessandro Stroppa,Alessandra Continenza,Hua Wu

DOI: https://doi.org/10.1039/d1tc00518a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:CrCl2(N2C4H4) monolayer: an appealing 2D ferromagnetic half-metal.
2D Hybrid CrCl2(N2C4H4)2 with Tunable Ferromagnetic Half-Metallicity

Wentao Hu,Ke Yang,Alessandro Stroppa,Alessandra Continenza,Hua Wu

DOI: https://doi.org/10.1039/d1tc00518a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Two-dimensional ferromagnetic (2D FM) half-metal holds great potential for quantum magnetoelectronics and spintronic devices. Here, using density functional calculations and magnetic pictures, we study the electronic structure and magnetic properties of the novel van der Waals (vdW) metal-organic framework (MOF), CrCl2(N2C4H4)2, i.e. CrCl2(pyrazine)2. Our results show that CrCl2(pyrazine)2 is a 2D FM half-metal, having a strong intralayer FM coupling but a much weak interlayer one due to the vdW spacing. Its spin-polarized conduction bands are formed by the pyrazine molecular orbitals and are polarized by the robust Cr3+ local spin = 3/2. These results agree with the recent experiments [Pedersen et al., Nature Chemistry, 2018, 10, 1056]. More interestingly, CrCl2(pyrazine)2 monolayer has a strong doping tunability of the FM half-metallicity, and the FM coupling would be significantly enhanced by electron doping. Our work highlights a vital role of the organic ligand and suggests that vdW MOF is also worth exploration for new 2D magnetic materials.
2D CrCl2(pyrazine)2 Monolayer: High-Temperature Ferromagnetism and Half-Metallicity.

Huanhuan Xie,Yu Qie,Imran Muhammad,Qiang Sun

DOI: https://doi.org/10.1088/1361-648x/ab5ca4

2019-01-01

Journal of Physics Condensed Matter

Abstract:The ferromagnetism in Cr-based monolayers is of current interest (2019 Nat. Nanotechnol. 14 408), however, the Curie temperature is low. How can we enhance the thermal stability of ferromagnetism? Motivated by the recent synthesis of the layered conductive magnet CrCl2(pyrazine)(2) (2018 Nat. Chem. 10 1056), we perform first-principles calculations and Monte Carlo simulations to demonstrate that the exfoliated 2D CrCl2(pyrazine)(2) monolayer is stable dynamically and thermally, and it is a ferromagnetic half-metal with a sizeable band gap of 2.8 eV in the semiconducting channel, and the strong in-plane Cr-Cr interaction results in a large magnetic anisotropy energy. Moreover, the sheet exhibits a high Curie temperature of 350 K due to the enhanced magnetic exchange interaction resulting from the aromatic property of pyrazine. All of these intriguing features endow 2D CrCl2(pyrazine)(2) sheet with good potentials for applications in nanoscale spintronics devices.
Ferromagnetic and Half-Metallic Fec2 Monolayer Containing C-2 Dimers

Tianshan Zhao,Jian Zhou,Qian Wang,Tyoshiyuki Kawazoe,Puru Jena

DOI: https://doi.org/10.1021/acsami.6b07482

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Ferromagnetism and half-metallicity are two vital properties of a material for realizing its potential in spintronics applications. However, none of the two-dimensional (2D) pristine metal carbide sheets synthesized experimentally exhibits half-metallicity with ferromagnetic coupling. Here, a ferromagnetic and half-metallic FeC2 sheet containing isolated C-2 dimers rather than individual carbon atoms is predicted to be such a material. Based on state-of-the-art theoretical calculations, we show that the FeC2 sheet is dynamically, thermally, and mechanically stable and can be chemically exfoliated from the bulk phase of layered ThFeC2. Due to its unique atomic configuration, the FeC2 sheet exhibits ferromagnetism with a Curie temperature of 245 K. This is in contrast to its bulk counterpart, ThFeC2, which is paramagnetic. We also find that, unlike the metallic metal carbide sheets, the FeC2 sheet is half-metallic with semiconducting spin-up and metallic spin down channels. Moreover, half-metallicity can remain until an equi-biaxial strain of 10%. In addition, we provide the Raman and infrared spectra which can be used to identify this new 2D structure experimentally in the future.
Doping Enhanced Ferromagnetism and Induced Half-Metallicity in CrI 3 Monolayer

Hongbo Wang,Fengren Fan,Shasha Zhu,Hua Wu

DOI: https://doi.org/10.1209/0295-5075/114/47001

2016-01-01

Europhysics Letters

Abstract:Two-dimensional materials are of current great interest for their promising applications to postsilicon microelectronics. Here we study, using first-principles calculations and a Monte Carlo simulation, the electronic structure and magnetism of CrI3 monolayer, whose bulk material is an interesting layered ferromagnetic (FM) semiconductor. Our results show that CrI3 monolayer remains FM with T-C similar to 75K, and the FM order is due to a superexchange in the near-90 degrees Cr-I-Cr bonds. Moreover, we find that an itinerant magnetism could be introduced by carriers doping. Both electron doping and hole doping would render CrI3 monolayer half-metallic, and steadily enhance the FM stability. In particular, hole doping is three times as fast as electron doping in increasing T-C, and a room temperature FM half-metallicity could be achieved in CrI3 monolayer via a half-hole doping. Therefore, CrI3 monolayer would be an appealing two-dimensional spintronic material. Copyright (C) EPLA, 2016
Tunable Magnetic Anisotropy in Two-Dimensional CrX3/AlN (x=i,br,cl) Heterostructures

Haiyan Zhu,Yifan Gao,Yusheng Hou,Zhigang Gui,Li Huang

DOI: https://doi.org/10.1103/physrevb.106.134412

2022-01-01

Abstract:Controlling the magnetic anisotropy of two-dimensional (2D) ferromagnets (FMs) is of great importance for the development of next generation spintronics. Here, by combining the 2D FM chromium trihalides CrX3 (X = I, Br, Cl) monolayer (ML) with the fully hydrogenated bilayer AlN (AlN-2L) together, the electronic and magnetic properties, especially the magnetic anisotropies, of CrX3/AlN heterostructures (CrX3 HSs) are systematically investigated based on first-principles calculations. When the polarization direction of AlN-2L reverses, the magnetic easy axis of CrX3 MLs can be switched between out-of-plane and in-plane directions. Particularly the magnetic anisotropic energy is tuned by a maximum of 200% variation in CrI3/AlN. It is shown that the different effects of AlN-2L on the modulation of the magnetic easy axis of CrX3 MLs are related to their different interfacial charge transfer/redistribution across their interfaces. In addition, a transition from FM semiconductor to half-metal is found in all CrX3 MLs when the polarization direction points toward CrX3 MLs. Our results suggest a feasible avenue for the design of van der Waals HSs to realize the control of magnetic anisotropy in 2D FMs.
Newtype two-dimensional Cr2O3 monolayer with half-metallicity, high curie temperature, and magnetic anisotropy

Wen-Zhi Xiao,Yu-Wen Zhang,Ling-Ling Wang,Chuan-Pin Cheng

DOI: https://doi.org/10.1016/j.jmmm.2021.168657

IF: 3.097

2022-02-01

Journal of Magnetism and Magnetic Materials

Abstract:Due to 100% spin polarization, half-metallic systems play a great role in the development of nanoscale spintronic devices. We conduct extensive calculations within spin-polarized density functional theory to design a newtpye two-dimensional Cr2O3 monolayer. The monolayer demonstrates robust stability as verified by formation energy, phonon spectrum, elastic constants, and molecular dynamics simulation. Each Cr2O3 unit cell gives rise to a total magnetic moment of 6.0 μB, mainly resulting from Cr sites due to the cooperation between crystal-field effect and Hund’s exchange. The monolayer is identified as a half-metallic ferromagnet with Curie temperature up to 460 K and 100% spin polarization. The super-exchange mechanism and direct exchange interaction are responsible for the ferromagnetic coupling. Moreover, the system shows large magnetic anisotropy with the easy axis in the basal plane. The excellent stability, half-metallicity, high Curie temperature, and magnetic anisotropy endow the monolayer with great potential in spintronic devices. This work provides a new pathway for designing ferromagnetic material with half-metallicity and high Curie temperature.

materials science, multidisciplinary,physics, condensed matter
CrI 3 /Y 2 CH 2 Heterointerface-Induced Stable Half-Metallicity of Two-Dimensional CrI 3 Monolayer Ferromagnets

Guoqing Wang,Wenjing Qin,Siyuan Wang,Birkneh Sirak Teketel,Weili Yu,Tianyong Luo,Bo Xu,Bin Lin

DOI: https://doi.org/10.1021/acsami.1c01768

2021-04-05

Abstract:Two-dimensional (2D) CrI3 monolayer ferromagnets are key to the development of future miniature spintronic devices and modulating them into a half-metal will greatly expand the application scenarios of CrI3 in nanospintronics. Nevertheless, existing strategies to induce half-metallicity of a CrI3 monolayer remain experimentally challenging and have unstable issues. In this work, the introduction of a 2D electride [Y2C]2+·2e– as an auxiliary layer is shown to be an effective way to achieve the generation of stable half-metallicity in the CrI3 monolayer. When the fully hydrogenated Y2CH2 and ferromagnetic CrI3 monolayer combine to form a heterostructure, surprisingly the appropriate amount of charge injection (0.72 e) turns CrI3 into a half-metal. Hetero-interfacial half-metallicity in CrI3 is an intrinsic one and does not require any chemical functionalization or external physical modification. Therefore, it is advantageous for practical applications of CrI3 in miniature spintronic devices, such as magnetic tunnel junctions, spin valves or spin field-effect transistors. A new strategy of the stable CrI3/Y2CH2 heterostructure was successfully developed to induce the half-metallicity of 2D CrI3 ferromagnets, which is experimentally feasible and half-metallic stable enough. This work paves the way for the application of the CrI3 monolayer in half-metallic-based spintronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01768?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01768</a>.The DOS, band structure, Fermi surface, ELF map, and phonon dispersion of Y2C, CrI3, Y2CH1, Y2CH2 monolayer, bilayer Y2C, and bilayer Y2CH1 and CrI3/Y2C-based heterostructure performance in this work (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01768/suppl_file/am1c01768_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Cr 2 NX 2 MXene (X = O, F, OH): A 2D ferromagnetic half-metal

Qian Sun,Jie Li,Yi Li,Zongxian Yang,Ruqian Wu

DOI: https://doi.org/10.1063/5.0056084

IF: 4

2021-08-09

Applied Physics Letters

Abstract:Using the spin-polarized first-principles calculations, we revealed that two-dimensional transition metal nitride MXenes Cr2NX2 (X = O, F, OH) are excellent two-dimensional half-metallic ferromagnetic materials. Their structures and ferromagnetic ground states are stable well above room temperature. In addition, their large half-metal bandgaps are enough to prevent spin reversal and ensure high spin filtering efficiency and large spin mean free paths. The half-metallic property of these functionalized Cr2NX2 systems is robust and can be maintained under tensile strains up to 10%. These predictions suggest that the functionalized Cr2NX2 is of great significance for the development of highly efficient spintronic devices for room temperature applications.

physics, applied
Two-dimensional Ferromagnetic Van Der Waals CrCl3 Monolayer with Enhanced Anisotropy and Curie Temperature

Feng Xue,Yusheng Hou,Zhe Wang,Ruqian Wu

DOI: https://doi.org/10.1103/physrevb.100.224429

2020-01-01

Abstract:Among the recently widely studied van der Waals layered magnets $\mathrm{Cr}{X}_{3}$ ($X=\mathrm{Cl}$, Br, I), $\mathrm{CrC}{\mathrm{l}}_{3}$ monolayer (ML) is particularly puzzling: it is shown by experiments to have only an in-plane magnetic easy axis and, furthermore, all previous first-principles calculation results contradict this. Through systematic first-principles calculations, we unveil that the in-plane shape anisotropy that dominates over the weak perpendicular magnetocrystalline anisotropy is responsible for the in-plane magnetic easy axis of $\mathrm{CrC}{\mathrm{l}}_{3}$ ML. To tune the in-plane ferromagnetism of $\mathrm{CrC}{\mathrm{l}}_{3}$ ML into the desirable perpendicular one, we propose substituting Cr with isovalent tungsten (W). We find that $\mathrm{CrWC}{\mathrm{l}}_{6}$ has a strong perpendicular magnetic anisotropy and a high Curie temperature up to 76 K. Our work not only gives insight into understanding the two-dimensional ferromagnetism of van der Waals MLs but also sheds new light on engineering their performances for nanodevices.
Electronic structure and magnetothermal properties of two-dimensional ScCl

Hao-Jia Wu,Dan Wang,Hua-Yun Geng,Xiang-Rong Chen

DOI: https://doi.org/10.1039/d4cp00282b

2024-03-06

Abstract:Two-dimensional ferromagnetic materials with intrinsic half-metallic properties have strong application advantages in nanoscale spintronics. Herein, density functional theory calculations show that monolayer ScCl is a ferromagnetic metallic material when undoped (n = 0), and the transition from metal to half-metal occurs with the continuous doping of holes. On the contrary, as the concentration of doped electrons increases, the system will exhibit metallic characteristics, which is particularly evident from a variation in spin polarizability. Furthermore, we have discussed how doped carriers affect the shape of the Fermi surface and the Fermi velocity of electrons. Most importantly, Monte Carlo simulations show that the ScCl monolayer is particularly regulated by carrier concentration (n) and magnetic field (h). Additionally, trends in energy and magnetic exchange coupling in different magnetic configurations (AFM phase and FM phase) with different doping concentrations are presented. When n < -0.16, the material is not only a half-metallic material that easily flips the magnetic axis, but also proves to be a candidate ferromagnetic material that works stably at room temperature in terms of dynamic stability. In addition, the origin of magnetocrystalline anisotropy is analyzed, and the contribution of different orbitals to spin-orbit coupling is presented. Moreover, we note that when magnetic field is small (h < 1 T), the change in size has a significant effect on ferromagnetic phase transition. However, when the system size is large (size >15 nm), TC is less sensitive to magnetic field. In addition, hole doping and size effect will greatly affect the hC of the system, but when the hole doping exceeds the critical value (n = -0.16), its influence on the hysteresis loop is no longer obvious. These interesting magnetic phenomena and easily adjustable physical properties show us that monolayer ScCl will be a promising functional material.
Intrinsic two-dimensional multiferroicity in CrNCl2 monolayer

H. Li 李,W. Shen 沈,Y. Pan 潘,Shengnan 胜男 Shen 申,Siyuan 思媛 Nie 聂,Jie 杰 Mei 梅

DOI: https://doi.org/10.1088/1674-1056/ac0787

Abstract:Two-dimensional multiferroics, which simultaneously possess ferroelectricity and magnetism in a single phase, are well-known to possess great potential applications in nanoscale memories and spintronics. On the basis of first-principles calculations, a CrNCl2 monolayer is reported as an intrinsic multiferroic. The CrNCl2 has an antiferromagnetic ground state, with a Néel temperature of about 88 K, and it exhibits an in-plane spontaneous polarization of 200 pC/m. The magnetic moments of CrNCl2 mainly come from the d5 xy orbital of the Cr cation, but the plane of the d xy orbital is perpendicular to the direction of the ferroelectric polarization, which hardly suppresses the occurrence of ferroelectricity. Therefore, the multiferroic exits in the CrNCl2. In addition, like CrNCl2, the CrNBr2 is an intrinsic multiferroic with antiferromagnetic-ferroelectric ground state while CrNI2 is an intrinsic multiferroic with ferromagnetic-ferroelectric ground state. These findings enrich the multiferroics in the two-dimensional system and enable a wide range of applications in nanoscale devices.

Materials Science,Physics
Two-dimensional multiferroic FeCl with room temperature ferromagnetism and tunable magnetic anisotropy via ferroelectricity

Yingjie Sun,Tao Feng,Xiuling Li,Fang Wu,Haifeng Lv,Xiaojun Wu

DOI: https://doi.org/10.1039/d1tc01788h

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:First-principles calculations reveal the electronic and magnetic properties of 2D FeCl toward spintronic applications.

materials science, multidisciplinary,physics, applied
Two-dimensional half-metallicity in transition metal atoms decorated Cr2Ge2Te6

Wei Kang,Xue Du,Jintian Wang,Ziqin Ye,Jinghong Zhao,Wei Wang,Yan Wang,Lin Wang,Xiaoqing Liu

DOI: https://doi.org/10.3389/fphy.2023.1188513

IF: 3.718

2023-04-07

Frontiers in Physics

Abstract:As one of the first experimentally found and naturally stable two-dimensional (2D) ferromagnetic materials, the monolayer Cr 2 Ge 2 Te 6 has garnered great interest due to its potential hires in electronics and spintronics. Yet, the Curie temperature of monolayer Cr 2 Ge 2 Te 6 is lower than the ambient temperature, severely restricting the creation of valuable devices. Using the first-principle calculations, we explored how the adsorption of 3 d transition metals affects the electronic and magnetic properties of the monolayer Cr 2 Ge 2 Te 6 (from Sc to Zn). Our findings indicate that depending on the 3 d transition metals to be adsorbed, the electronic properties of the Cr 2 Ge 2 Te 6 adsorption system may be adjusted from semiconductor to metal/half-metal. We found that the adsorption of Ti and Fe leads to a transformation from semiconductor to metal. While in Cr 2 Ge 2 Te 6 @Sc, V, Co, Ni, and Cu, the absorption realizes the changes from semiconductor to half metal. Moreover, adsorption may modify the magnetic moment and Curie temperature of the adsorbed system to enhance the ferromagnetic stability of the monolayer Cr 2 Ge 2 Te 6 . Furthermore, we are able to modulate the half-metallic of Cr 2 Ge 2 Te 6 @Mn by means of electric fields. Hence, adsorption is a viable method for modulating the ferromagnetic half-metallic of 2D ferromagnets, paving the door for the future development of nano-electronic and spintronic devices with enhanced performance for 2D ferromagnetic materials.

physics, multidisciplinary
Cr2NX2 MXene (X = O, F, OH): A 2D Ferromagnetic Half-Metal

Qian Sun,Jie Li,Yi Li,Zongxian Yang,Ruqian Wu

DOI: https://doi.org/10.1063/5.0056084

IF: 4

2021-01-01

Applied Physics Letters

Abstract:Using the spin-polarized first-principles calculations, we revealed that two-dimensional transition metal nitride MXenes Cr2NX2 (X = O, F, OH) are excellent two-dimensional half-metallic ferromagnetic materials. Their structures and ferromagnetic ground states are stable well above room temperature. In addition, their large half-metal bandgaps are enough to prevent spin reversal and ensure high spin filtering efficiency and large spin mean free paths. The half-metallic property of these functionalized Cr2NX2 systems is robust and can be maintained under tensile strains up to 10%. These predictions suggest that the functionalized Cr2NX2 is of great significance for the development of highly efficient spintronic devices for room temperature applications.
Electric-field induced half-metal in monolayer CrSBr

Hao-Tian Guo,San-Dong Guo,Yee Sin Ang

2023-08-07

Abstract:Two-dimensional (2D) half-metallic materials are highly desirable for nanoscale spintronic applications. Here, we propose a new mechanism that can achieve half-metallicity in 2D ferromagnetic (FM) material with two-layer magnetic atoms by electric field tuning. We use a concrete example of experimentally synthesized CrSBr monolayer to illustrate our proposal through the first-principle calculations. It is found that the half-metal can be achieved in CrSBr within appropriate electric field range, and the corresponding amplitude of electric field intensity is available in experiment. Janus monolayer $\mathrm{Cr_2S_2BrI}$ is constructed, which possesses built-in electric field due to broken horizontal mirror symmetry. However, $\mathrm{Cr_2S_2BrI}$ without and with applied external electric field is always a FM semiconductor. A possible memory device is also proposed based on CrSBr monolayer. Our works will stimulate the application of 2D FM CrSBr in future spintronic nanodevices.

Materials Science
Covalent 2D Cr2Te3 Ferromagnet

Mengying Bian,Aleksandr N. Kamenskii,Mengjiao Han,Wenjie Li,Sichen Wei,Xuezeng Tian,David B. Eason,Fan Sun,Keke He,Haolei Hui,Fei Yao,Renat Sabirianov,Jonathan P. Bird,Chunlei Yang,Jianwei Miao,Junhao Lin,Scott A. Crooker,Yanglong Hou,Hao Zeng

DOI: https://doi.org/10.1080/21663831.2020.1865469

2021-01-01

Materials Research Letters

Abstract:To broaden the scope of van der Waals 2D magnets, we report the synthesis and magnetism of covalent 2D magnetic Cr2Te3 with a thickness down to one-unit-cell. The 2D Cr2Te3 crystals exhibit robust ferromagnetism with a Curie temperature of 180 K, a large perpendicular anisotropy of 7 × 105 J m−3, and a high coercivity of ∼4.6 kG at 20 K. First principles calculations further show a transition from canted to collinear ferromagnetism, a transition from perpendicular to in-plane anisotropy, and emergent half-metallic behavior in atomically-thin Cr2Te3, suggesting its potential application for injecting carriers with high spin polarization into spintronic devices.
Room-temperature ferromagnetism and half-metallicity in monolayer orthorhombic CrS2

Bocheng Lei,Aolin Li,Wenzhe Zhou,Yunpeng Wang,Wei Xiong,Yu Chen,Fangping Ouyang

DOI: https://doi.org/10.1007/s11467-023-1387-y

2024-03-25

Frontiers of Physics

Abstract:Two-dimensional materials with high-temperature ferromagnetism and half-metallicity have the latest applications in spintronic devices. Based on first-principles calculations, we have investigated a novel two-dimensional CrS 2 phase with an orthorhombic lattice. Our results suggest that it is stable in dynamics, thermodynamics, and mechanics. The ground state of monolayer orthorhombic CrS 2 is both ferromagnetic and half-metallic, with a high Curie temperature of 895 K and a large spin-flipping gap on values of 0.804 eV. This room-temperature ferromagnetism and half-metallicity can maintain stability against a strong biaxial strain ranging from −5% to 5%. Meanwhile, increasing strain can significantly maintain the out-of-plane magnetic anisotropy. A density of states analysis, together with the orbital-resolved magnetic anisotropy energy, has revealed that the strain-enhanced MAE is highly related to the 3d-orbital splitting of Cr atoms. Our results suggest the monolayer orthorhombic CrS 2 is an ideal candidate for future spintronics.

physics, multidisciplinary
Highly stable two-dimensional metal-carbon monolayer with interpenetrating honeycomb structures

Shulong Li,Kah-Meng Yam,Na Guo,Yong Zhao,Chun Zhang

DOI: https://doi.org/10.1038/s41699-021-00235-y

IF: 10.516

2021-05-14

npj 2D Materials and Applications

Abstract:Abstract With the ongoing effort in proposing and realizing functional two-dimensional (2D) materials, we predict by first-principles calculations a family of 2D metal-carbon (M–C) crystals consisting of M–C trigonal lattice interpenetrated with the metal buckled honeycomb structure. We suggest by simulations that the 2D M–C crystals can be readily fabricated by a self-organizing lattice reconstruction process after placing metal atoms on hollow sites of γ-graphyne. In total, we found 12 members of the family and they exhibit a variety of electronic and magnetic properties. In this work, we highlight and focus on the Fe member of the family, 2D-Fe 2 C 12 . Each Fe in 2D-Fe 2 C 12 has a magnetic moment of 1 μ B due to the spin splitting of Fe E1 bands at Fermi surface, resulting in half metallicity and high catalytic activity with unusually high-density single-atom Fe active sites. Ab initio molecular dynamics simulations revealed that the 2D-Fe 2 C 12 retains its structural integrity up to 700 K of simulated short duration annealing. We expect these results to stimulate experimental research for the 2D M–C crystals we proposed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Electric-field induced half-metal in experimentally synthesized CrSBr monolayer

Hao-Tian Guo,San-Dong Guo,Yee Sin Ang

DOI: https://doi.org/10.1039/d3cp04133f

IF: 3.3

2023-10-26

Physical Chemistry Chemical Physics

Abstract:Two-dimensional (2D) half-metallic materials are highly desirable for nanoscale spintronic applications. Here, we propose a new mechanism that can achieve half-metallicity in 2D ferromagnetic (FM) material with two-layer magnetic atoms by electric field tuning. We use a concrete example of experimentally synthesized CrSBr monolayer to illustrate our proposal through the first-principle calculations. It is found that the half-metal can be achieved in CrSBr within appropriate electric field range, and the corresponding amplitude of electric field intensity is available in experiment. Janus monolayer Cr2S2BrI is constructed, which possesses built-in electric field due to broken horizontal mirror symmetry. However, Cr2S2BrI without and with applied external electric field is always a FM semiconductor. A possible memory device is also proposed based on CrSBr monolayer. Our works will stimulate the application of 2D FM CrSBr in future spintronic nanodevices.

chemistry, physical,physics, atomic, molecular & chemical

2D hybrid CrCl 2 (N 2 C 4 H 4 ) 2 with tunable ferromagnetic half-metallicity

2D hybrid CrCl<sub>2</sub>(N<sub>2</sub>C<sub>4</sub>H<sub>4</sub>)<sub>2</sub> with tunable ferromagnetic half-metallicity

2D Hybrid CrCl2(N2C4H4)2 with Tunable Ferromagnetic Half-Metallicity

2D CrCl2(pyrazine)2 Monolayer: High-Temperature Ferromagnetism and Half-Metallicity.

Ferromagnetic and Half-Metallic Fec2 Monolayer Containing C-2 Dimers

Doping Enhanced Ferromagnetism and Induced Half-Metallicity in CrI 3 Monolayer

Tunable Magnetic Anisotropy in Two-Dimensional CrX3/AlN (x=i,br,cl) Heterostructures

Newtype two-dimensional Cr2O3 monolayer with half-metallicity, high curie temperature, and magnetic anisotropy

CrI 3 /Y 2 CH 2 Heterointerface-Induced Stable Half-Metallicity of Two-Dimensional CrI 3 Monolayer Ferromagnets

Cr 2 NX 2 MXene (X = O, F, OH): A 2D ferromagnetic half-metal

Two-dimensional Ferromagnetic Van Der Waals CrCl3 Monolayer with Enhanced Anisotropy and Curie Temperature

Electronic structure and magnetothermal properties of two-dimensional ScCl

Intrinsic two-dimensional multiferroicity in CrNCl2 monolayer

Two-dimensional multiferroic FeCl with room temperature ferromagnetism and tunable magnetic anisotropy via ferroelectricity

Two-dimensional half-metallicity in transition metal atoms decorated Cr2Ge2Te6

Cr2NX2 MXene (X = O, F, OH): A 2D Ferromagnetic Half-Metal

Electric-field induced half-metal in monolayer CrSBr

Covalent 2D Cr2Te3 Ferromagnet

Room-temperature ferromagnetism and half-metallicity in monolayer orthorhombic CrS2

Highly stable two-dimensional metal-carbon monolayer with interpenetrating honeycomb structures

Electric-field induced half-metal in experimentally synthesized CrSBr monolayer