Abstract:Structured complex silicon components have been widely used in solar cells, biomedical engineering and other industrial applications. As silicon is a typical brittle material, ultrasonic vibration cutting (UVC) is a promising method to achieve better cutting performance than conventional techniques. High-frequency 1D UVC possesses higher nominal cutting speed and material removal rate than many 2D/3D UVC systems, and thus, it has great development potential in industrial applications of structured silicon components. However, few researchers have applied 1D UVC to the cutting of structured silicon surfaces, since its main drawback is tool marks imprinted by the vibration on machined surface. In this study, to uncover the key machining characteristics under the condition of 1D UVC, a series of tests involving diamond cutting grooves were first performed on the silicon surface. The machined surface and chips were subsequently measured and analyzed to evaluate the critical undeformed chip thickness, surface characteristics, and chip formation. Regarding the main drawback of 1D UVC, a novel theoretical model was developed for predicting the length of tool marks and evaluating the impact of tool marks on the surface finish. The results demonstrated that the critical undeformed chip thickness of silicon reached 1 030 nm under a certain vibration amplitude and that an array of micro grooves was generated at the plastic region with a surface roughness (<em class="EmphasisTypeItalic">R</em><sub>a</sub>) as low as 1.11 nm. Moreover, the micro topography of the continuous chips exhibited discontinuous clusters of lines with diameters of dozens of nanometers, only composed of polysilicon. The novel theoretical model was able to predict the length of tool marks with low error. Thus, the impact of tool marks on the surface finish can be reduced and even eliminated with help of the model.

Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Fabrication of Hexagonal Microlens Arrays on Single-Crystal Silicon Using the Tool-Servo Driven Segment Turning Method

0706 Uctile Cutting of a Microstructure Array on Silicon Surface by Using a Diamond Tool with a Negative Rake Angle

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Auto-tracking Single Point Diamond Cutting on Non-Planar Brittle Material Substrates by a High-Rigidity Force Controlled Fast Tool Servo

Feasibility investigation on ductile machining of single-crystal silicon for deep micro-structures by ultra-precision fly cutting

Fabrication of infrared hexagonal microlens array by novel diamond turning method and precision glass molding

Ductile Cutting of Silicon Microstructures with Surface Inclination Measurement and Compensation by Using A Force Sensor Integrated Single Point Diamond Tool

Sculpturing of single crystal silicon microstructures by elliptical vibration cutting

Systematic Modeling and Rapid Control for Diamond Machining of Periodical Optical Surface

Force Servo Nano-Precision Diamond Cutting of Freeform Surfaces on a Micro-Precision Machine

A globally smooth tool path reconstruction method for the ultra-precision diamond turning of microlens arrays

Experimental Investigation on Form Error for Slow Tool Servo Diamond Turning of Micro Lens Arrays on the Roller Mold

Fabrication of Large-Area Silicon Spherical Microlens Arrays by Thermal Reflow and ICP Etching

Key machining characteristics in ultrasonic vibration cutting of single crystal silicon for micro grooves

A Study on the Material Removal Characteristics and Damage Mechanism of Lapping for Pressureless Sintered Silicon Carbide (SSiC) Microlens Cavity

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Ultra-precision Manufacturing of Microlens Arrays Using an Optimum Machining Process Chain

Effect of rapid thermal annealing on the surface properties of the microlens arrays machined on monocrystalline silicon

Micromachining 3d Hemispherical Features in Silicon Via Micro-Edm