Abstract:Metal foams are a relatively new class of materials exhibiting well physical and mechanical property. A modeling algorithm, which can accurately describe the detailed structure of cellular materials, is useful to discuss the relationship between mechanical properties and structure of cellular materials based on the analysis methods of finite element. In this paper, a novel modeling method is proposed by MATLAB image processing and synchrotron X-ray computed tomography (μCT) scanning. Accordingly, the finite element model (FEM) of aluminum foam, which is the core of aluminum foam sandwiches (AFS), is established by the novel method. The failure mode of AFS is discussed by ABAQUS/Explicit. The ductile damage initiation criterion, MSFLD damage initiation criterion and shear damage initiation criterion are used to describe the damage initiation, and the linear damage evolution law is used in the calculation process. Unlike Michailidis's 3D reconstruction method and Jeon's 3D reconstruction model, the novel method has a smaller difference in structure size between the geometric model and the real model, and higher efficient. According to statistics, the porosity is 49.2%. The equivalent diameter is distributed mainly in interval (1, 3). Damage initiation criterion and linear damage evolution law can describe the AFS collapse mode of core shear. Critical loads of FEM calculation are agreed with theoretical modeling, which proves the 3D reconstruction algorithm of foam core is correct and applicable. The critical load is decreased with span distance increasing.

The Role of Cell Collapse Mechanism in Mechanical Performance of Aluminium Foam Fabricated by Melt Processing

Effects of cell wall property on compressive performance of aluminum foams

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

High temperature and mesostructure effect on aluminum foam compression responses

Fabrication of Mg-Al Alloy Foam with Close-Cell Structure by Powder Metallurgy Approach and Its Mechanical Properties

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

Compressive Performance and Deformation Mechanism of the Dynamic Gas Injection Aluminum Foams

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Preparation principle and compression properties of cellular Mg–Al–Zn alloy foams fabricated by the gas release reaction powder metallurgy approach

Microstructure and Compressive Properties of Aluminum Foams Made by 6063 Aluminum Alloy and Pure Aluminum

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Characterization of Aluminum Foam Impact Response

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

The Plastic Collapse of Sandwich Beams with a Metallic Foam Core

Collapse Models of Aluminum Foam Sandwiches under Static Three-Point Bending Based on 3D Geometrical Reconstruction

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography