Abstract:The cold-formed steel (CFS) double-lipped equal-leg angle is widely used in modular container houses and cold-formed steel buildings. To study the buckling behavior and bearing capacity design method of the cold-formed steel (CFS) double-lipped equal-leg angle under axial compression, 24 CFS double-lipped equal-leg angles with different sections and slenderness ratios the axial compression were conducted. The test results showed that the distortional buckling occurs for specimens with a small width-to-thickness ratio and small slenderness ratio. The buckling interactive with distortional and global flexural buckling was observed for the specimens with small width-to-thickness ratios and large slenderness ratios. The specimens with large width-to-thickness ratios and small slenderness ratios showed interactive buckling with local and distortion buckling. The specimens with large width-to-thickness ratios and large slenderness ratio developed interactive buckling with local, distortional, and global flexural buckling. The finite element model established by ABAQUS software was used to simulate and analyze the test. The buckling modes and the load-carrying capacities analyzed by the finite element model agreed with the test results, which showed that the developed finite element model was feasible to analyze the buckling and bearing capacity of the CFS double-lipped equal-leg angles. The experimental results were compared with those calculated by the direct strength method in the North American standard and the effective width method in the Chinese standard. The comparisons indicated that the calculated results are very conservative with maximum value 36% and 51% for direct strength method and effective width method, respectively. The coefficient of variation was 0.276 and 0.397, respectively. Finally, the modified direct strength method and the modified effective width method were proposed based on the experimental results. The comparison on the ultimate strength between test results and calculated results by using the modified method showed a good agreement. The modified method can be as a proposed desigh method for the ultimate strength of the CFS double-lipped equal-leg angles under axial compression.

Interaction behavior of fixed ended cold-formed steel unequal lipped angle columns

INTERACTION CURVES FOR CONCRETE-FILLED L-SHAPED MULTI-CELLED STEEL TUBE SECTIONS UNDER COMBINED BIAXIAL BENDING AND AXIAL FORCE

Local and Distortional Buckling of Extruded Aluminium Alloy Lipped Angle Columns

Testing, Modelling and Design of Aluminium Alloy Single-Angle Members Connected by One Leg under Eccentric Compression

Experimental and Numerical Study of 7A04-T6 Extruded Aluminium Alloy Lipped Angle Columns in Axial Compression

Column-to-column Interaction in Buckling of Frames

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

Global Buckling Behavior of CFST Columns with Assembling Errors

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Experiment and Design Method of Cold-Formed Thin-Walled Steel Double-Lipped Equal-Leg Angle under Axial Compression

Study of Flexural–torsional Buckling Behaviour of 6061-T6 Aluminium Alloy Unequal-Leg Angle Columns

Column tests of cold-formed steel non-symmetric lipped angle sections

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Flexural Behavior of Circular Section Concrete-Filled Steel Tubes with Embedded Latticed Angles

Tests and Finite Element Analysis on the Local Buckling of 420 MPa Steel Equal Angle Columns under Axial Compression

Flexural Buckling of Steel Angles: Experimental Investigation

Buckling behavior of cold-formed steel sigma and lipped channel section beam-columns: Experimental and numerical investigation

Numerical study on the local buckling of 420MPA steel equal angle coloums under axial compression

Interaction Between Local and Distortional Buckling Modes in Cold-Formed Steel Members Subjected to Pure Bending

Study on the Local Buckling Behavior of Steel Equal Angle Members under Axial Compression with the Steel Strength Variation