Abstract:Large-area nanostructuring of glasses using intense laser beams is a challenging task due to the material's extreme non-linear absorption of laser energy. Precise optimization of the process parameters is essential for fabricating nanostructures with large-area coverage. In this study, we report the findings on creating high-spatial-frequency LIPSS (HSFL) on borosilicate glass through direct laser writing, using a femtosecond laser with a wavelength λ = 800 nm, pulse duration τ = 35 fs, and repetition frequency frep = 1 kHz. We measured the single-pulse ablation threshold and incubation factor of Borosilicate glasses to achieve high-precision control of the large-area surface structuring. Single-spot experiments indicated that, when there was higher fluence and a larger number of irradiated laser pulses, a melt formation inside the irradiated area limited the uniformity of LIPSS formation. Additionally, the orientation of the scan axis with the laser beam polarization was found to significantly influence the uniformity of LIPSS generated along the scan line, with more redeposition and melt formation when the scan axis was perpendicular to the laser beam polarization. For large-area processing, the borosilicate glass surface was scanned line-by-line by the laser beam, with a scan orientation parallel to the polarization of the laser. The optical characterization revealed that the transmittance and reflectance of the borosilicate glass decreased significantly after processing. Additionally, the surface's wettability changed from hydrophilic to super-hydrophilic after processing. These chemical contamination-free and uniformly distributed structures have potential applications in optics, microfluidics, photovoltaics, and biomaterials.

Study on fs-laser machining of optical waveguides and cavities in ULE ® glass

Optical loss measurements in femtosecond laser written waveguides in glass

Fabrication of Optical Cavities with Femtosecond Laser Pulses

High-visibility Fabry-Pérot interferometer fabricated in ULE® glass through fs-laser machining

High Precision Microscale 3D Manufacturing of Ultra Low Expansion Glass by Femtosecond Selective Laser Etching

Integrated multimode optical waveguides in glass using laser induced deep etching

Ultrafast Laser Direct Writing In Glass: Thermal Accumulation Engineering And Applications

Low-loss optofluidic waveguides in fused silica enabled by spatially shaped femtosecond laser assisted etching combined with carbon dioxide laser irradiation

Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

3D Manufacturing of Glass Microstructures Using Femtosecond Laser

Ultrafast Laser-Fabricated Fluoride Glass Waveguides with Exceptionally High Refractive Index Change for Mid-Infrared Integrated Optics

Investigation of ultrafast laser photonic material interactions: challenges for directly written glass photonics

Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Femtosecond pulsed laser micro-machining of glass substrates with application to microfluidic devices

Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass

Fabrication of micro-optical components by using a femtosecond laser

Ultrafast-Laser-Induced Tailoring of Crystal-in-Glass Waveguides by Precision Partial Remelting

Direct Femtosecond Laser Processing for Generating High Spatial Frequency LIPSS (HSFL) on Borosilicate Glasses with Large-Area Coverage

Low Bend Loss, High Index, Composite Morphology Ultra-fast Laser Written Waveguides for Photonic Integrated Circuits