Abstract:Calcium aluminate phases have a particular effect on the early heat release during setting initiation and have a substantial influence on the further workability of ordinary Portland cement. The nature of the calcium aluminate hydration products and its kinetics strongly depends on sulfate content and humidity. The effect of mineralisers on melt formation and viscosity is well described for calcium silicate systems, but information is still lacking for calcium aluminates. Therefore, the synergistic effect on the crystal structure and hydration mechanism of the tricalcium aluminate phase of the addition of mineralizers, i.e. Li 2 O, CuO, SO 3 to the raw meal is here investigated. Co-doped calcium aluminate structures were formed during high-temperature treatment. Thermal analysis (TG–DTA and heating microscopy) was used to describe the ongoing high-temperature reaction. Resulting phase composition was dependent on the concentration of the mineralizer. While phase pure system was prepared with low mineralizer concentrations, with increasing mineralizer content the secondary phases were formed. Raman spectroscopy and XPS analysis were used to investigate the cation substitution and to help describe the cations bonding in co-doped calcium aluminate system. Prepared powders have been hydrated in a controlled manner at different temperatures (288, 298, 308 K). The resulting calorimetric data have been used to investigate the hydration kinetics and determine the rate constant of hydration reaction. First-order reaction (FOR) model was here applied for the activation energy and frequency factor calculations. The metastable and stable calcium aluminate hydrates were formed according to initial phase composition. In phase pure systems with low S content, the formation of stable and metastable hydrates was depended on the reaction temperature. Conversely, in systems with secondary phases and higher S content, the hydration mechanism resembled that which appears in calcium sulfoaluminates.

Monocarboluminate: Sorption dependence of thermal, elastic, and transport properties

Investigations on phase constitution, mechanical properties and hydration kinetics of aluminous cements containing magnesium aluminate spinel

Impact of Distinct Ca$^{2+}$ Sources on the Physical Properties of Alumina-based Macroporous Refractories for Thermal Insulation at High Temperature

Structural, electronic, and mechanical properties of calcium aluminate cements: Insight from first-principles theory

Iron in carbonate containing AFm phases

Hydration kinetics of C3A: effect of lithium, copper and sulfur-based mineralizers

Influence Mechanisms of CaCO3/NaAlO2 Ratios in Carbonaluminate Cementitious Materials

Formation, Stability, and Crystallinity of Various Tricalcium Aluminate Polymorphs

Comparative study of hydration of monocalcium aluminate and quaternary phase and the amorphous AH3 phase in their hydrates

Classical and new insights into the methodology for characterizing the hydration of calcium aluminate cements

Electronic, elastic properties and thermal conductivity of the major clinker phases of portland cement: Insights from first-principles calculations

Dynamics, Structure and Glass Formation of Calcium Aluminate Liquids

Solubility of tricalcium aluminate from 10 °C to 40 °C

Phase Composition, Microstructure and Mechanical Properties of Aluminous Cements Containing Magnesium Aluminate Spinel

From marble waste to monocarboaluminate binder: role of sodium aluminate composition, calcined clay type, and curing temperature

Understanding why Alite is responsible of the main mechanical characteristics in Portland cement

Influence of (al, Fe, Mg) Impurities on Triclinic Ca3SiO5: Interpretations from DFT Calculations

Investigation of the AFm-Cl system: Fe-to-Al solid solution, thermal behavior and carbonation

The nanomechanical properties of non-crosslinked calcium aluminosilicate hydrate: The influences of tetrahedral Al and curing age

Molecular insight into the initial hydration of tricalcium aluminate

Probing the hydration behavior of tricalcium aluminate under the in situ polymerization of acrylic acid