Abstract:Calcium silicate hydrate (C-S-H) is the main constituent of hydrated cement paste and determines its cohesive properties. Because of the environmental impact of cement industry, it is more and more common to replace a part of the clinker in cement by secondary cementitious materials (SCMs). These SCMs are generally alumina-rich and as a consequence some aluminum is incorporated into the C-S-H. This may have consequences on the cohesion and durability of the material, and it is thus of importance to know the amount and the location of Al in C-S-H and what the parameters are that control these features. The present paper reports the (29)Si and (27)Al MAS NMR analyses of well-characterized C-A-S-H samples (C-S-H containing Al). These samples were synthesized using an original procedure that successfully leads to pure C-A-S-H of controlled compositions in equilibrium with well-characterized solutions. The (27)Al MAS NMR spectra were quantitatively interpreted assuming a tobermorite-like structure for C-A-S-H to determine the aluminum location in this structure. For this purpose, an in-house written software was used which allows decomposing several spectra simultaneously using the same constrained spectral parameters for each resonance but with variable intensities. The hypothesis on the aluminum location in the C-A-S-H structure determines the proportion of each silicon site. Therefore, from the (27)Al NMR quantitative results and the chemical composition of each sample, the intensity of each resonance line in the (29)Si spectra was set. The agreement between the experimental and calculated (29)Si MAS NMR spectra corroborates the assumed C-A-S-H structure and the proposed Al incorporation mechanism. The consistency between the results obtained for all compositions provides another means to assess the assumptions on the C-A-S-H structure. It is found that Al substitutes Si mainly in bridging positions and moderately in pairing positions in some conditions. Al in pairing site is observed only for Ca/(Si+Al) ratios greater than 0.95 (equivalent to 4 mmol.L(-1) of calcium hydroxide). Finally, the results suggest that penta and hexa-coordinated aluminum are adsorbed on the sides of the C-A-S-H particles.

Understanding why Alite is responsible of the main mechanical characteristics in Portland cement

Fundamental Discrepancy of Chemical Reactivity of Tricalcium Oxy Silicate (alite), Dicalcium Silicate (Belite), and Their Polymorphs: A Density Functional Theory Study

Influence of (al, Fe, Mg) Impurities on Triclinic Ca3SiO5: Interpretations from DFT Calculations

Electronic, elastic properties and thermal conductivity of the major clinker phases of portland cement: Insights from first-principles calculations

Mechanical and dynamical stability of major oxide constituents of Portland cement clinker: a density functional theory study

Hydration reactivity difference between dicalcium silicate and tricalcium silicate revealed from structural and Bader charge analysis

Hydration Characteristics of Tricalcium Aluminate in the Presence of Nano-Silica

27Al and 29Si solid-state NMR characterization of calcium-aluminosilicate-hydrate

Impact of MgCl2 on the mechanical properties of alite pastes at mesoscale and nanoscale

Assessment of mechanical, thermal properties and crystal shapes of monoclinic tricalcium silicate from atomistic simulations

Relation Between Reactivity and Electronic Structure for Α′l-, Β- and Γ-Dicalcium Silicate: A First-Principles Study

Early Hydration and Viscoelastic Properties of Tricalcium Aluminate Pastes Influenced by Soluble Sodium Salts

Intrinsic reactivity and dissolution characteristics of tetracalcium aluminoferrite

Understanding silicate hydration from quantitative analyses of hydrating tricalcium silicates

Role of interatomic bonding in the mechanical anisotropy and interlayer cohesion of CSH crystals

Structural, electronic, and mechanical properties of calcium aluminate cements: Insight from first-principles theory

Molecular insight into the initial hydration of tricalcium aluminate

A Scanning Transmission X-ray Microscopy Study of Cubic and Orthorhombic C3A and Their Hydration Products in the Presence of Gypsum

Elastic and thermodynamic properties of the major clinker phases of Portland cement: Insights from first principles calculations

A kinetic Monte Carlo study of the C 3 S dissolution mechanism